Backspace offset 3in lift Wheels

http://www.tirepackage.com/Wheels/X...0&t_pt=100106&t_pl=5352&t_pn=W/PXD79568060300

I am planning on using these rims with 285/75/R16 BF Goodrich The backspace is 4.5 in, offset 0. Will 4.5 Backspace work? Searches say 4in or less and others say 4.5in will work. This link http://www.rims-n-tires.com/rt_carselector.jsp?carYear=1985&carMake=Toyota says these rims will work but does not mention backspace

16x8, 6 on 5.5 Bolt Pattern

• Backspace 4.50 in.
• Max Load = 2200lbs
• Finish = Matte Black
• Hubcentric = No
• Offset = 0 mmh

First generation 04 Taco 4X4
Will 4.5 Backspace work? I cant find what I want with 4 in or less backspace. I dont want to change the UCAs. I have read that 4.5 BS will work and others say only 4 in BS or less is good. These rims are XD Series XD795 Hoss Wheel

Anyone want to stick there neck out? Thanks in advance

 

Here's a link to a guy running a different wheel, but same specs (according to wheelpros):

http://www.tacomaworld.com/forum/1st-gen-tacomas/32917-got-my-new-wheels-pics.html

http://www.wheelpros.com/browse.asp...92&desc=one piece aluminum painted&section=AR

 

Thanks Drock42

 

Sure thing! Don't forget to post some pics once they're on!

 

Worst case is the width of the tires will rub the UCA and you need wheel spacers. I suggest 4.25" or smaller if you go past 10.50"/stock width tires.

 

I am picking up the rims tommorow.Going with gloss black. I will mount the stock 265/70/R16's on them until they wear out. I may go with 265/ 75/R16 instead of the 285s but that decision will be later.

All of the 4.0 and 3.75 backspace rims were oldschool style.