1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

BARELY USED: Toytec Adj. Coil Overs (Early Gen Tacoma) F/S

Discussion in 'Buy / Sell / Trade' started by poopshute, Feb 1, 2010.

  1. Feb 1, 2010 at 1:06 PM
    #1
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Hey everyone. Selling these CO's (600lb coil rate) from Toytec. They have MAYBE 1500 miles on them. Bought them about 6 months ago. I'm going in a different direction suspension wise and want to off-load these while they're in almost new shape. They have some SLIGHT cosmetic flaws from adjusting them and having new springs swapped out on them (the new Eibach springs have 1000 or less miles on them). Other than that, they're in perfect shape. Ride great with no extra weight up in front (they're a bit stiffer than my non-trd stock springs but that's a good thing).

    I'd prefer local pick up (Colorado) but will ship as long as buyer pays shipping and paypal fees. Selling these for $600 obo (or best offer). These retail new for $700. Please offer up. Worst I can say is "no"!!!

    Please keep in mind that the silver springs are a $40 upgrade through ToyTec.

    (These are still on my truck as they're the only shocks I have right now. I'll take them off the second I get a decent offer).

    Couple pictures below. If you need more pics, let me know:

    [​IMG]
    [​IMG]
     
  2. Feb 1, 2010 at 7:07 PM
    #2
    JFISH

    JFISH Active Member

    Joined:
    Dec 17, 2009
    Member:
    #27751
    Messages:
    38
    Gender:
    Male
    First Name:
    Jordan
    Austin
    Vehicle:
    BASIC
    Kenwood Audio
    Do these add a lift at all to the front from stock height prerunner??
     
  3. Feb 1, 2010 at 8:41 PM
    #3
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Yes. They offer 0-3.5" of lift over stock. At the height you see them set in the picture, I'm getting ~3" of lift over stock.
     
  4. Feb 1, 2010 at 9:53 PM
    #4
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Bed-time Up!
     
  5. Feb 1, 2010 at 10:38 PM
    #5
    01tacoprerunner

    01tacoprerunner Lifted 'n Locked 4WD Prerunner

    Joined:
    Jun 5, 2009
    Member:
    #18077
    Messages:
    3,247
    Gender:
    Male
    First Name:
    Brian
    Bluefield, WV
    Vehicle:
    01 4WD Prerunner with No-slip locker
    4WD Conversion, No-slip locker, 5100s set at 2.5" and shackles in the back. Black 2nd gen rims, and Courser M/T tires, Bull Bar,Fog lights, UWS toolbox, CB Radio, Fiberglass antenna, 2nd Gen Badges, Deck Plate Mod, Diff Breather Mod, Sockmonkey decals.
    How do they ride compared to stock????
     
  6. Feb 2, 2010 at 9:23 AM
    #6
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    They're a bit stiffer than my original non-trd bouncers... which is a good thing. I have NO extra weight up front on my truck and the ride is still fine. My wife is very picky to the ride as she gets motion sickness easy. She says the ride is a little more bumpy but she has now gotten used to it. Honestly, compared to other trucks I've been in, the ride is just fine. The extra stiffness is welcomed compared to what I had before... felt like a boat going over bumps and what not.
     
  7. Feb 2, 2010 at 9:14 PM
    #7
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Pending with 04trd....
     
  8. Feb 3, 2010 at 6:00 PM
    #8
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Still got 'em. Looking for offers...
     
  9. Feb 3, 2010 at 6:04 PM
    #9
    fireturk41

    fireturk41 I like to break shit!

    Joined:
    Dec 23, 2008
    Member:
    #11857
    Messages:
    4,798
    Gender:
    Male
    First Name:
    Kevin
    High Point, NC
    Vehicle:
    280k miles
    SAS, Locked front rear, Ufab sliders and bumpers, air compressor, 35" BFG KM2 on steelies and 36" TSLs
    will it fit an 02
     
  10. Feb 3, 2010 at 6:07 PM
    #10
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Yeah, these are for the early gen Taco's which is 98-2004. Straight bolt-ons.
     
  11. Feb 3, 2010 at 6:12 PM
    #11
    fireturk41

    fireturk41 I like to break shit!

    Joined:
    Dec 23, 2008
    Member:
    #11857
    Messages:
    4,798
    Gender:
    Male
    First Name:
    Kevin
    High Point, NC
    Vehicle:
    280k miles
    SAS, Locked front rear, Ufab sliders and bumpers, air compressor, 35" BFG KM2 on steelies and 36" TSLs
    i like but id hafta save up, so dont wait on me haha
     
  12. Feb 4, 2010 at 7:15 AM
    #12
    BlueYota

    BlueYota Well-Known Member

    Joined:
    Jun 23, 2009
    Member:
    #18801
    Messages:
    82
    Gender:
    Male
    First Name:
    Arron
    South Texas, WAY south!!!
    Vehicle:
    Blue 06 4x4 TRD
    3" lift
    Will it come with top plate and all as shown above? Those are the 5100 series shocks, correct?
     
  13. Feb 8, 2010 at 2:42 PM
    #13
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    Yeah, it'll come just as pictured. I'll pressure wash them before I send them out. The CO's are a direct bolt-on.

    Still have these...
     
  14. Feb 16, 2010 at 7:39 PM
    #14
    silver

    silver Member

    Joined:
    Feb 8, 2010
    Member:
    #31000
    Messages:
    7
    Gender:
    Male
    First Name:
    Andrew
    Riverside CA
    Vehicle:
    03 prerunner trd V6
    OME struts/880, billet grille, clarion screen, AFE Pro Dry w/ deck plate mod
    did you have them on a 4 or 6 cylinder?
     
  15. Feb 17, 2010 at 9:18 AM
    #15
    poopshute

    poopshute [OP] Member

    Joined:
    Jul 7, 2009
    Member:
    #19385
    Messages:
    15
    Gender:
    Male
    3.4l v6
     
  16. Feb 17, 2010 at 9:34 AM
    #16
    BSPDX

    BSPDX Well-Known Member

    Joined:
    Apr 16, 2009
    Member:
    #16048
    Messages:
    2,074
    Gender:
    Male
    subbed... for next week
     
  17. Feb 17, 2010 at 10:43 AM
    #17
    jonny

    jonny Betty White Edition Heep ZJ

    Joined:
    Jun 21, 2007
    Member:
    #1887
    Messages:
    8,375
    Gender:
    Male
    First Name:
    John
    i have a cousin who is looking to buy this exact same set up. i will shoot him your link. he is in yuma az though. i will let him know, but please don't hold these on my account
     
To Top