Bed Rack W.Washington

$450 OBO

Decided to sell the bed rack that I fabricated for my '07 AC, Long Bed.

1.5" HREW Tube, MIG welded and painted with Rustoleum brush on paint. Not the prettiest paint in the world, but it's held up alright after about 15,000 miles. This rack has been all over Washington, Montana and cross-country to the East Coast..

Decided that I want to try a shorter rack.

Try and find a mass-produced rack for our trucks that captures the bed-bolts. You won't.

Base plates are 1/4" Mild Steel, gusseted.

This was one of the first projects that I completed with tubing, and my bends got botched up. That being said, the center cross bar is about 1/2" higher than the other two, and has a slight wave in it due to a mis-bend. Perfectly functional, and has held up to thousands of miles with a Roof Top Tent on it.

Hi-Lift mount on the left (passenger) side.

Don't think shipping will be an option, delivery might be an option/meet halfway (immediate PNW only). I'll help you install if you come up to my shop in Bellingham.

Again - it's not perfect, but it's served me well - and you'd be hard pressed to find another rack that captures the bed bolts as opposed to the bed rails.

Thanks,

Jake

 

Bump for a great member. Very happy with my sliders.

 

Thanks, Kolt!

Hoping to get this gone so I can fabricate another rack..

 

For long bed only right? Might have missed it on your post but didn't see that specified.

Good looking rack tho, nicely built.

 

Yup, Long Bed.

Edited first post.

Interested?

 

wish you were closer I'd pick this up today!

 

This rack is 100% badass - I've seen it in person.

 

Road trip..

 

Thanks Andrew!

 

i got the short bed so it wouldnt fit, i was just looking and it and liking your setup

 

PM'd.

 

Bump..

Come on TW, starting to fab another rack - don't want two of them!

 

Price drop.

$400.. OBO

 

$350..

Or, how about a new rack..

 

$200

 

What is the rack sized for? I've got a 2nd Gen long box. How high are the rails? (even with the cab?)

Edit: as I learn to read I see the first page of the thread. Silly me. What is still available for the rack, your used one or the new one?

 

The used one is sitting out and ready for you!

Shoot me a PM.

Thanks,

Jake

 

Going to the scrapyard this week...

Bump..

 

Ugg, that is painful. Just use it as metal scraps for your projects?

 

I know, Kolt!

I've considered that - however, the time required in stripping all of the paint/cutting it apart seems like it won't be time effective.