Bed Tie Down Anchors - VersaTrax

Any particularly reason why 2000-2006 Tundra is not on the list? The bed bolts look so similar to the Tacoma ones to my eye.

Also, when not in use, is the idea to remove the hoop, yielding a smooth top surface for sliding things on? If so, is there any protection for the internal T50 socket to avoid getting gummed up by (for example) wood chips/landscaping/mulch/dirt (I use my '02 Tundra for hauling green waste quite a bit).

 

I have not confirmed those years. However, if you’d like to send me a photo of the bed bolt next to a tape measure I can verify OneTrax will fit. And you are correct, the tie down fitting easily snaps in and out to allow only the OneTrax base to be installed if you need to slide objects in the bed. In your case, the internal drive on the bolt will probably be gummed up but this won’t affect the function of the tie down.

 

10% discount code: "TacomaWorld10" is still active! Snag a pair and tie down your gear!

 

Just ordered a set, as I have been eye-balling these.

 

Will ship today!

 

where are you located?

 

Clarksville, TN.

 

Received these today. Great timing too, as I wanted to never-seez (anti-seize) my factory bed bolts. Just a side note - my factory bed bolts were T55.

 

Awesome! Feel free to reach out if you ever need anything.

 

Discount code doesn't seem to be working

 

I fixed the code, but raised it to 15% instead. Use code “TacomaWorld15” for 15% off.

 

thank you! Just ordered a set