1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Benelli M4 stock chop

Discussion in 'Guns & Hunting' started by ERdept, May 7, 2009.

  1. May 7, 2009 at 4:11 PM
    #1
    ERdept

    ERdept [OP] Well-Known Member

    Joined:
    Oct 22, 2007
    Member:
    #3187
    Messages:
    996
    Gender:
    Male
    I started a thread earlier for those interested in Benelli mods.

    I also chopped my stock with a miter saw and filled the inside end with Marine Tex putty to serve as an anchor for the new butt pad. It had a very long LOP and was for monkey arms, snagged on body armor as well. Difficult to train out, to pull the gun out and lost prescious seconds if needed in the heat of a situation.

    First thread......

    http://www.tacomaworld.com/forum/guns-hunting/33650-benelli-m4-mods.html

    Completed Chop...Length is 36.5 inches, if you have one, can you measure yours to see how much I chopped off please?

    [​IMG]

    [​IMG]
     
  2. May 8, 2009 at 7:38 PM
    #2
    ERdept

    ERdept [OP] Well-Known Member

    Joined:
    Oct 22, 2007
    Member:
    #3187
    Messages:
    996
    Gender:
    Male
    The completed Benelli

    [​IMG]

    [​IMG]
     
To Top