Beretta4x4 Build and BS thread (gone fishing?)

Hello all! Under the suggestion of my fellow TTC buddies, I have decided to start a build thread.

Currently the truck looks like this:





Some video destroying my driveshaft and CV axle November 22, 2019 (courtesy @riz_atx ):
https://youtu.be/5XkNOgfcJM4

July 2019 Hidden Falls Day Trip




July 2019 Hidden Falls TTC Farewell Bash



July 2019 Colorado Camping Trip





June 2019 Backcountry Trail Run






June 2019 Hidden Falls Adventure Park



April 2019 Lone Star Toyota Jamboree



Current and future modifications are in the second post.

I purchased my 2009 TRD Off-road in December of 2016. I had alwaysdreamed off owning an off-road Toyota truck since I was a little kid and watching "Back to the Future" seeing Marty McFly's beautiful black Toyota. I ended getting a pristine white truck for under $20k with 83k miles on the odometer.



I was happy with it stock, but joining Tacomaworld of course did not help. It all started after my first wheeling trip with some Tacomaworld members and the Heart of Texas off-road club and a four-day excursion in Big Bend National Park.



I learned that my departure angle and suspension travel wasn't enough for the type of wheeling I'd be interested in. I ordered the complete OME 3" with 886 front coils, Nitrochargers with rock guards and Dakar leaf springs. I also had 255/85r16 Cooper ST-MAXX tires installed to get a little taller and improvethose angles some.



I finally was able to test out my setup on a TTC off-road trip to Hidden Falls. I learned that I was slightly rubbing the cab mount, my approach angle was adequate, I needed the capabilities of a winch because I was hitting trails that were gnarly and my departure angle still sucked (Damn you tow package)

My response was ordering the ARB Deluxe Winch Bumper, M8000S Winch, 4xInnovations sliders and the 4xInnovations high clearance rear Bumper with tire swingout.

I had 4Wheel Parts do the front bumper install for convenience reasons, but if you're considering this route, I'd recommend you find a cheaper install alternative as I paid at least $1k more than I should have going this route.



After the bumper install, I needed to get foglights, and on that note, i figured I'd replace my headlamp housings (one was melted due to using a small-guage jumper cable). I ordered the Spyder headlights from Tacomabeast. I also ordered the Bajadesigns complete adapter set from Paranoid Fabrications. After installing the headlights, my wife told me to order matching taillamps, so I placed another order from Tacomabeast.

 

Current parts installed list:

Drivetrain, Body and Frame
Valvoline/Mobil 1/Lucas Synthetic Fluids
Tom Woods Custom 1-Piece Driveshaft
Dobinson's Snorkel
CAT 3.5" inlet Pre-filter
Spiker Gas Hood Struts
Toyota TRD Performance Brake Pads
Customised Martin Rack, shortened and fit for

my truck.​

CBI Prinsu Awning Brackets
Rear Diff Breather relocated to behind left taillight
Removed Fender Liners
Removed Front Fender Flares
Pinch-weld hammered out for clearance
Softopper "Camper-shell"
Relentless Fabrication Cab Mount Chop Plates
ARB Recovery Point
ECGS Solid Clamshell Bushing
Rago Fabrication Bed Stiffeners
Tuff Stuff Fridge Slider mounted in the Bed

Suspension and Tires
OME 886 Coil Springs
OME Nitrocharger shocks with rock guards
OME Dakar HD leaf springs
Icon Delta Joint UCAs
Pro-Comp 31-series 16x8" Rims x5
BFG KO 265/75r16
Cooper ST-MAXX 255/85r16 Tires x5
Nankang Mudstar 315/75r16 x5
Cooper Discovery AT3 285/75R16

Armor
ARB Deluxe Winch Bumper
Warn M8000S Winch
4xInnovations High Clearance Rear Bumper with Swingout Tire Carrier
4xInnovations DOM tube Sliders, Square Main tube and kickouts welded to frame installed by @Texoma
4xInnovations 3/16" Steel Front Skid Plate
4xInnovations 3/16" Steel Transmission Skid Plate

Electrical
Baja Designs Sport-R Amber Wide/Cornering

Clear/Spot Bumper Lights​

Baja Designs Sport-R Amber/Wide/Cornering Ditch

Lights​

Baja Designs SAE Amber Fog Lights
Baja Designs S2 Sport Flush Clear Reverse

Lights​

LED Chinese Bluetooth rock lights
Paranoid Fabrication Foglights Adapter Brackets
Paranoid Fabrication Foglights Adapter Harness
Spyder LED Projector Headlights
Spyder LED Taillamps
Amazon LED Third Brake Light
Meso Customs LED (White) Map Lights
Meso Customs LED (White) Dome Light
LED License plate bulbs (white)
HKB Electronics Alternator Booster
Solarex 100W Solar Panel
Renogy Wanderer solar charge controller
12V outlet with 2x USB ports and battery monitor
Rago Fabrications Universal Relay Mount
Blue Sea 12-spot auxiliary fuse panel
Blue Sea 100A circuit breaker
Garmin GPS
Insignia Full HD Dash Cam
Cobra DX IX CB (tuned, 1.2 CH1 and CH2, 1.35

CH40)​

Firestick 3' and 4' antennas

$165 Midland MXT275 MicroMobile GMRS Radio - 15 watts Two-Way Radio with Integrated Control Microphone - Overland Caravanning Tractors - Detachable External Magnetic Mount Antenna - 8 Repeater Channels

Midland MXT275 GMRS 15W radio
Laird 2.5dB GMRS no-ground antenna
NMO antenna cable for GMRS
JVC KW-V850BT DDIN head unit
DVD player parking brake bypass
Chameleon DVD player headrests

Miscellaneous:
Trasharoo
ARB 2500x2000 Awning
Softtopper in black with clear rear window
Flame-colored Anodized Devil Horn Grill Emblem
Big Sky 2-Gun Gun Rack
Rago Fabrication Mid-height Modular Bed Rack
CSI 52 Quart Fridge/Freezer
CSI 84 Quart Dual-zone Fridge/Freezer
CSI 64 Quart Dual-zone Fridge/Freezer
Bird Dawg Tech Deck with assorted R.A.M. accessories
Relentless Fabrication Hood Hinge Ditch Light Mounts
Armortech Off-road Hi-lift Bedrail Mounts
62" Hi-lift Jack
TRED traction boards (Black)
ARB Snatch Block
ARB Tree Saver x2
ARB Snatch Strap
ARB Winch Blanket x2
ARB Recovery Kit Bag
ARB Air pressure gauge

$98 Viair 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)

Viair 88P Air compressor
Stanley tool bag
Assorted wrenches, screwdrivers, tape and wire
Metric/Standard sockets on bailing wire rings
Ever-expanding patch and sticker collection

Coming SOON:
4xInnovations X-Case Skid Plate (awaiting Exhaust reroute)

Alpine Designs Offroad Cab Mount Relocation Kit (awaiting install)

Want list:
Relocate Rear Shocks and upgrade to 12" or 14"
4.56 Nitro Gears
Front Locker
Exhaust Reroute
3-person Roof Top Tent or Swag
Baja Designs Rock Lights
Baja Designs Light Bar
Ultimate Headlight Upgrade
Dual battery setup
Onboard Air System
Total Chaos Spindle Gusset
LCA Skids
Rear Diff skid
Upgraded Fuel Tank skid
Thinner heavy-duty floor mats for manual
Maxx Traxx
Tie-down mod for bed bolts
Tint windows to max legal darkness

 

Subbed

 

Got it

 

Super subd!!! ​

 

New 'n Cool

 

We need a dream sheet also please the hoard kindly demands.

 

I will begin adding it

 

Added want list and coming soon list to second post

 

Heck ya !! Nice list

 

Thanks. I'm planning on most of that stuff ordered and installed by spring of 2020.

 

​

 

Parts are mostly arriving Wednesday-Thursday by FedEx, UPS and USPS

 

Sweet hey man I’m busy after work today you wanna swing by Thursday afternoon?

 

Sure, that works for me

 

Ordered Icon Tubular UCAs with Delta Joints and caps on Amazon for $670. Should be in next week.

 

Man your truck coming up quick

 

This I was in another thread when I posted in yours earlier