SOLD - Bike Carrier: RockyMounts Driveshaft Track and Victory 4x4 Tire Tray

SOLD

This setup has worked great, but I recently replaced with a 1 Up rack to mounted to my bed rack to better handle the varying wheelbases of my bikes.

Rocky Mounts Driveshaft Track, used for about 1 year. Comes with 2 keys for the lock, shims for a different axle size, and mounting hardware. One bolt is slightly stripped from accidentally using a T25 instead of a T30 torx bit. I found a T27 works fine for that one, or it can be easily replaced.

Victory 4x4 Rear Tire Tray, used for about 6 months. Tray only, about 17 inches long. The factory powder coat is flaking off in spots and has surface rust in those spots. Should be good as new with a quick sand and black spray paint.

I’d prefer to sell as a complete package, might separate if no takers.

$100 local pickup, Santa Cruz, CA
$115 shipped

 

Have any installed pics? I don’t know for sure if I’ll go this route or get a rack or a topper sooner rather than later but I’d like to see how this works!

 

I don’t have any pics with the bike mounted on this setup, but this pic is probably the best one I have that shows how it was installed. At one point I moved the fork mount in more to accommodate the shorter wheelbase of my gravel bike.



Before I got the bed rack I had just the fork mount installed on the front bed rail with the open bed, here’s a pic of that.

 

I'll take this if it's still available, PM sent