1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

BLHM finger print fix

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Reklaw31, Sep 21, 2011.

  1. Sep 21, 2011 at 6:35 PM
    #1
    Reklaw31

    Reklaw31 [OP] Well-Known Member

    Joined:
    Aug 22, 2011
    Member:
    #62124
    Messages:
    210
    Gender:
    Male
    First Name:
    Ron
    Niceville FL
    Vehicle:
    05 Tacoma
    Bilstein 5100's, 1" rear AAL, 17X8 Liquid metal Gatlins, Yokohama Geolander ATs, Blacked out headlights, undercover tanneau, got some stuff line-exed and my paint sucks!
    Hey guys, just wanted to share this with everyone. Just finished a black headlight mod, and I think I'm good, I sealed the crap out of 'em so lets pray for no leaks! for those of you that have, or are planning to do this, here is a trick if you accidentally get a fingerprint in the lens and notice it after you re-seal: I finished mine and noticed 1 big fat finger smudge inside after i had sealed. I took a shish-kabob skewer (coat hanger or other would work) and wrapped a soft cloth or paper towel around the end (make sure you tape it securely so it doesn't fall off inside...Disaster!) and spay the glass cleaner of you choice on the end, stick it in the hole the bulb goes in and rub, take dry cloth and repeat if necessary! Voila! fixed. You can hit almost any spot on the lens if needed.

    Hope this helps someone. You guys have helped me more than enough!

    photo 1 copy 2.jpg
    photo 2 copy 3.jpg
     
  2. Sep 21, 2011 at 6:42 PM
    #2
    KAGING

    KAGING Well-Known Member

    Joined:
    Aug 28, 2011
    Member:
    #62466
    Messages:
    149
    Gender:
    Male
    First Name:
    just call me "KAGS"
    OC
    Vehicle:
    RED PreRunner SR5 Short Bed
    Flowmaster Exhaust 50 Series, BLHM, Toyota Tube Step & Bed Extender, Bike Rack Mount on Bed, Windows & Bug Deflector, Emblems & TRD Stickers Off, Grill Rims Caliper Drum Tube Step Painted.....
    how did u seal it?
     
  3. Sep 21, 2011 at 6:44 PM
    #3
    Reklaw31

    Reklaw31 [OP] Well-Known Member

    Joined:
    Aug 22, 2011
    Member:
    #62124
    Messages:
    210
    Gender:
    Male
    First Name:
    Ron
    Niceville FL
    Vehicle:
    05 Tacoma
    Bilstein 5100's, 1" rear AAL, 17X8 Liquid metal Gatlins, Yokohama Geolander ATs, Blacked out headlights, undercover tanneau, got some stuff line-exed and my paint sucks!
    I just warmed em up and used the factory stuff still inter + a good bead if window and door silicone. Then I Hobbes it in every nook and cranny around the outside.
     
To Top