Body Mount Relocate Kit (RedGoatFab & Haws)

Sweet, going to need some eventually then

 

all it is, is drilling like a 1/2" hole through the floorboard to connect the mount to the extended plate. you still use the stock mounting hole and bolt for the front hole of the flat plate

 

still no point in doing it if you arent going to tub the front firewall

 

No news is not good news! Grrrrrr

 

we'll agree to disagree haha

the Nitto Trail Grapplers (35s) were still rubbing and I chopped the cab mounts all the way to the bolt (literally, I shaved some of the bolt) and still rubbed when suspension was flexed in a turn. now I am 100% rub free, cornering at 25-30 mph on dirt tracks. it has made all the difference for this guy

 

I talked with with Gary a few days ago and he's updating the design so a person can order according to whether they have a body lift or not.

 

Did he tell you when it'll be available?

 

Ill be going over to help him with this in the next week. He's going to make three options. Stock, 1" body lift, 2" body lift for the relocate kits. Also a precut piece to fill the hole in the frame.

 

Ah, too bad he's not making one for a 3" body lift.

 

sub'd

 

Ready to buy!

 

hmm

 

I'm ready to buy. OP says new kit is ready to ship. Does the new kit come with frame hole filler pieces for $89+shipping?

 

The OP is 2 years old.

 

I understand that it was made 2 years ago but people can update the thread when they like. I'm also basing my original question off this post specifically on top of original posting:

Usually when something new happens within a thread, someone updates the original post with that new info, that's why I asked.

 

If it was updated there would be a message at the bottom of the post saying last edited: date


__________________________________________ Edit: See it changes. ---->

 

Ok, then my fault. Why are you tripping over this? Do you know the answer to my original question based on @Haws post from only a week or two ago? Just trying to get an answer from OP, not the run around from someone else.

 

I just know that I bumped a dead thread in July after getting no follow up on an email to the fabricator, who doesn't use TW, in June and now there is a slew of posts with not a lot of value added. Until @Haws hears back from Gary we are at a standstill. And then if you want to order a set you would need to email Gary directly as he has not logged on in two years.

 

Understandable. I've watched this thread for over a year debating on doing just a CMC or full relocation and finally made my decision. Hopefully we can both purchase soon. I'll email Gary tomorrow and figure out if I can pre order if they are still deciding on new design or what's happening. Or get no answer back like you.

 

I got an answer to the first email but not the second. He said he was updating it when I first emailed. @Haws says it's a work in progress.