1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Brake Proportioning Valve Adjuster 95.5-04 1st gen

Discussion in 'Buy / Sell / Trade - Other' started by Beefed Taco, Aug 21, 2010.

  1. Aug 21, 2010 at 10:12 AM
    #1
    Beefed Taco

    Beefed Taco [OP] Taco Vending Machine Vendor

    Joined:
    Dec 18, 2008
    Member:
    #11706
    Messages:
    1,307
    Gender:
    Male
    First Name:
    Brian
    My Metal Shop
    Vehicle:
    99 Taco
    streetacos.com parts!
    I made this contraption recently for street or dirt trucks. It will allow you to adjust how much pressure the rear brakes get since lowered trucks get too much pressure because the valve thinks there is a heavy load, and lifted trucks lose pressure. Not sure how well it works because I removed the valve on my truck a few years ago, so I can't test it. Just snip the rod about 2" from the valve, stick it through the heim and bolt this bracket to the valve. They are available on my website if interested.

    [​IMG]

    2BPV.jpg
     
To Top