Bussman RTMR Fuse/Relay Boxs Complete Kits and Blue Sea Mounting Plates

Prewired Bussmann RTMR fuse/relay boxes for auxiliary power circuits and Universal Mounting plates



Bussmann RTMR Easy Install System by Tacoma Pros. Kit includes RTMR, relays, fuses, battery cables and mounting plates. We have multiple configurations and offer many upgrades so please feel free to contact us.
Mounting Plates:
-Mounting Plates attach to the drivers side inner fender using the existing OEM threaded mounting holes with supplied bolts.
-All plates are 1/8" thick Aluminum plate, unfinished and blank without mounting holes for custom layout configuration and mounting.
-Mounting plates are offered made for automatic transmission trucks or trucks without a clutch cylinder and reservoir assembly mounted to the inner fender.
RTMR mounting plate with 80 AMP Bussmann Breaker Kits.
We also offer Bussmann RFRM 10 relay and 40 fuse boxes.
Electrical or suspension installations in Southern California
Please contact for details at tacomapros@gmail.com


http://www.tacomapros.com/bussmann-rtmr-fuse-relay-box-prewired-4-ft-lead/

OPTION 1
A) Small RTMR Bussmann Fuse/Relay box Universal Mounting Plate - $50 SHIPPED


B) New Bussmann RTMR and Bussman 80 AMP Breaker Mounting Plate $60- SHIPPED - IN STOCK


C) Bussmann RTMR and Breaker Mounting plate for 2016 Tacoma Auto-Trans $60 SHIPPED- NEW ITEM - IN STOCK


D) Bussmann RTMR mounting plate with kick out for 2005-2015 Tacoma Auto- Trans $65 SHIPPED - IN STOCK


RFRM Bussmann Universal Fuse and Relay box Mounting Plate - $60 SHIPPED- IN STOCK

All plates can be easily modified to fit most 2nd gen Tacoma engine configurations.
Bussmann 80 amp Panel Mount Breakers- $30

Raptor- Pro Series Circuit Breakers with Manual Reset Button and Gold Plated Terminals:
180 AMP Breaker - $30 ea


Battery Cable Set, 2 ft long each- 2ga Power and 6ga Ground with sealed Tin Plated Copper Terminal Lugs and double heat shrink. $20
Please contact for longer cables.

Switch Backs-Prewired, 5 Switch Harnesses - $45 (does not include switch or switch bank housing)
6 switch Harness - $50
5 switch bank housing - $10

Option 2)
A) Standard Large Mounting Plate with kick-out, fits 12 fuse block, breaker and relays-(Mounting bend flap up) $65 SHIPPED- In Stock


Option 3)
ATRAC Mounting Plate with kick-out fits 12 fuse block, breaker and relays - $65 SHIPPED (for ATRAC with Auto Trans equipped trucks )- In Stock


You can pick up if your in the So Cal area (562)

I accept Cash, Card Or Paypal

Sorry no returns, refunds or exchanges.

PM or email me if you have any questions.
tacomapros@gmail.com

If you need Welding, Machining, Tube Bending or Fabrication please contact me.
http://www.tacomaworld.com/forum/southern-california/282990-anyone-need-welding-la-oc.html

TacomaPros.com- Tacoma Off Road Parts and Accessories- ICON*KING*TOTAL CHAOS- Dealer
TOP-FAB.com Design- Fabrication- Welding
Thank you for all your support!

 

Count me in for a small plate. Can it still accommodate the breaker and 12 fuse Blue Sea box?

Will pick up locally too.

 

Hi Matt, missed you at the last meet but your truck looks great!
The small Mounting plate can accomidate the 12 fuse panel however it may be a little tight with a square breaker and relays. I use the rectangular breaker with the 6 fuse panel and it seem to fit just right with room for relays. The slightly larger plate without the kick-out can accommodate the 12 and have plenty of room for a large breaker and relays. I attached some pics to show different placement of the 12 fuse panel on the smaller mounting plate.

 

Yep I was busy trying to fit everything for the meet, but I missed it!

Sounds good, I'll take the larger plate. Can I pick it up at the next meet?

 

Ok cool, I'll bring it to the next meet. I have two types of mounting angles. One allows for the horns to be mounted behind the fuse mounting plate (horns moved for Satoshi Grill Mod) and the other mounting plate is angled so the plate is slightly more level.
Which mounting option would you like?

 

I'm going to move the horns to the other side, no worries about the horns being there.

 

ok cool.. Ill get it going

 

Much appreciated man!

 

Ill take option #3 and can also pick it up lemme know

 

I have the 80 degree plate in stock but will have to build the 90 degree plates, 1 week leadtime, usually less

 

I have option 3 in stock now. I am usually free during the day or at the meets too for pick up.

 

Pm'd

 

What do you have for the manual trucks with the A-Trac? I have a panel now but looking to upgrade and slightly change the lay out so I can accommodate for a 12 as well as some relay mounts.

 

PM replied

 

I haven't had the chance to do the mock up on this model yet. Please send me a pic of the mounting area and I can make it. Thanks

 

New mounting plates in from the Laser cutter and out to the Bender today...

 

Save one for me when I send you that picture after I get off work I need to fit a square circuit and a 12 Blue sea fuse block

 

Is this just the plate? Or does it include the fuse block and breaker in picture? Do you design these for 1st gen?

 

This is just for the mounting plate. I haven't had the chance to mock up 1st Gen but would be happy to.Send me a pic of the mounting area and I'll make it... Thanks for the interest!

 

Emailed you the pics