Cali Raised LED- 2005-2020 Toyota Tacoma Rock Sliders BOLT ON Sliders

Please let me know if you need any other photos!

 

@CaliRaisedLed Just wanted to say the sliders arrived MUCH earlier than expected (raw/no finish probably helped) and packaged extremely well. The welds are BEAUTIFUL and the construction overall looks top notch. Can't wait to get them on the trail - there's a trail nearby I couldn't fit through with wider sliders, and I'm hoping the high angle on these will let me squeak through.

 

Send us some photos when you get them on!

 

USE CODE "BLACKNOVEMBER"
https://caliraisedled.com/pages/2021-black-friday-deals-black-november-cali-raised-led

SHOP LED LIGHTING : https://caliraisedled.com/pages/lighting

SHOP SKID PLATES : https://caliraisedled.com/collections/skid-plates-and-body-armor

SHOP BED ACCESSORIES : https://caliraisedled.com/collections/bed-accessories-molle

SHOP ROCK SLIDERS : https://caliraisedled.com/collections/2016-2020-toyota-tacoma-rock-sliders-armor

SHOP BED RACKS / ROOF RACKS : https://caliraisedled.com/collections/2016-2020-toyota-tacoma-racks

 

I'd love to see some more for the DCLB. Some that illustrated how far the 25 degrees stick out past the door. Thanks!

 

Just got mine and can't wait to install them! They look great.

@CaliRaisedLed (or anyone) Do the backing plates need to be painted or are they zinc or something?

 

Ok so not sure if this is right or not, but all 6 of my long bolts for the clamps are 2.5". From what I can gather from all the install videos I should have two 3" long bolts and four 2.5". In some of the videos it looks like the 2.5" bolt will work all around, but does anybody know?

 

They stop about 6 inches after the back door. Skip too 25:50 in this video to take a better look at it! Thanks. https://www.youtube.com/watch?v=JbiEp9R-QlQ&t=390s

 

6" with a kickout? What about the front door, how far does it stick out?
Thanks!

 

I completely miss read the question. So the 25 degree will stick out 3" and the kick-out is around 4.5". I will send you photos so you can see what it looks like!

 

Yay, finally able to get mine installed. Very easy for sure. Love the fit and look.

 

Dang those are clean!!

 

Thank you very much! Here is a video of how they are made! Please let me know if you have any other questions.

https://www.youtube.com/watch?v=j_vS72sdtgQ&t=4s

 

Looks great!!

 

https://caliraisedled.com/collections/2016-2020-toyota-tacoma-rock-sliders-armor
We snapped our fingers twice and got a set of rock sliders!
https://www.instagram.com/reel/CXCXHmTAViH/

 

Just finished install on an 09 Access Cab.



I used all of the frame inserts on each side (the ones I think are referenced as "optional" in the instruction bid), but my AC does not accommodate the rearmost frame clamp. I'm not particularly concerned.



Extremely low profile. If you creep through tight spaces or just don't like the step look, these are good to go.



Nice hardware, great fit, and absolutely worth the money.

Random detail shots:

POR-15 on interior of all mounting surfaces:


Rearmost frame claw (???) not used on this 09 Access Cab. Four rectangular plates used. My frame is a little munged so I had to tighten everything up out of the recommended order to pull everything together:

 

What are the torque specs for the various bolts? For the metal frame insert doodads, do those need rust protection or are they zinc or aluminum? The question was asked but an answer was not posted here.

 

They're bare steel. FWIW I painted mine with a couple coats of black rattlecan and then hosed all of the mounting hardware off with Amsoil HDMP. If you wanted to go the extra mile, POR-15 the inserts and use HDMP (or FF or cosmoline or whatever you want) between the inserts and the frame.

 

Which variant of POR-15 did you use? I looked on their site and saw the top coat line but do not know if that is what you mean.

 

The stuff I used on the insides of the brackets on the sliders (and on my frame) is the POR-15 Rust Preventer. It comes in a couple different packages, this is a random one just so you know what product I'm talking about -

$79 POR-15 Six Pack Rust Preventive Coating, Stop Rust and Corrosion Permanently, Anti-rust Protective Barrier, 4 Fluid Ounces, Gloss Black, Pack of 6

https://www.amazon.com/POR-15-45006-6PK-Gloss-Preventive-Coating/dp/B00J2VULQ6/

The Top Coat goes over POR-15 anywhere it will be exposed to heavy UV (direct sunlight) and isn't necessary inside the frame rails.

POR-15 is probably overkill for the backing plates and slider brackets, but I had some leftover from doing my frame and frame plates.