1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Camburg UCAs

Discussion in 'Suspension' started by 08yodatoy, May 31, 2012.

  1. May 31, 2012 at 1:24 PM
    #1
    08yodatoy

    08yodatoy [OP] Member

    Joined:
    Sep 20, 2010
    Member:
    #43537
    Messages:
    5
    Gender:
    Male
    First Name:
    joe
    Ok
    Vehicle:
    08 sr5 trd silver
    trd cold air, fowmaster cb exhaust ,leveling kit, pro comp 8128, pro comp mud terrain tires
    Hey guys I recently purchased Camburg coil overs and upper control arms to replace the 2.5" spacers I had above my stock coil over ( bad idea looked good and was cheap but destroyed my ball joints) any how now that I have the Camburg coil overs and the UCAs in there I was looking at the angle of the upper ball and it's steel pretty steep is that normal for these UCA?

    My Taco is an 08 access cab with the TRD off road package
    Iv got 17" rims with 285 70R17 tires and I have had to trim the plastic in the wheel well a bit but not to much!!

    Any advice would help thanks
     
  2. May 31, 2012 at 5:04 PM
    #2
    YotaDan

    YotaDan Dan Vendor

    Joined:
    Apr 1, 2009
    Member:
    #15461
    Messages:
    2,228
    Gender:
    Male
    First Name:
    Dan
    Oregon
    You may have them cranked up too far.
     
  3. May 31, 2012 at 5:12 PM
    #3
    Sublime

    Sublime Well-Known Member

    Joined:
    Nov 14, 2009
    Member:
    #25918
    Messages:
    3,456
    Gender:
    Male
    First Name:
    Mike
    Phoenix, AZ
    Vehicle:
    08 TRD 4x4
    Icon/All Pro.....chopped for 35's
    Pics?
     
To Top