Can't Turn Off Keyless Entry Beeps

SoCalSB · Feb 20, 2015

Omerta[OP] initial post: ↑

1. Open the driver's door, and insert the key into the ignition. Leave the door open.
2. Remove the key from the ignition, and within 5 seconds, re-insert the key and then turn the ignition to ON.
3. Wait at least 10 seconds, but less than 20 seconds. After waiting, press a button on the remote twice. Press the same button two times - don't press two different buttons. The system will acknowledge with a beep if you did it right.
Click to expand...

This worked on my 2015.

archerm3 · Sep 9, 2015

Omerta[OP] initial post: ↑

I've followed the instructions below numerous times, I can't figure out what I'm doing wrong. I hear the acknowledgement beep, but the car still beeps every time I go to lock or unlock. If anyone can help, I'd appreciate it.

I have a 2009 TRD Tacoma, thanks.

1. Open the driver's door, and insert the key into the ignition. Leave the door open.
2. Remove the key from the ignition, and within 5 seconds, re-insert the key and then turn the ignition to ON.
3. Wait at least 10 seconds, but less than 20 seconds. After waiting, press a button on the remote twice. Press the same button two times - don't press two different buttons. The system will acknowledge with a beep if you did it right.
Click to expand...

worked for my 2015.

Log in or Sign up

Welcome to Tacoma World!

Can't Turn Off Keyless Entry Beeps

#41
SoCalSB Active Member

#42
archerm3 Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Can't Turn Off Keyless Entry Beeps

#41 SoCalSB Active Member

#42 archerm3 Well-Known Member

Products Discussed in Entire Site Forum: 2nd Gen. Tacomas (2005-2015)

#41
SoCalSB Active Member

#42
archerm3 Well-Known Member

Products Discussed in