Caster cam bolt eliminators $50 , 92211

They work with stock lower pivots.

 

How do these work? Do you weld them on?

 

No , take out the stock and replace, they have 3 settings +4,0,-4 caster.

 

Are these for a 2nd gen?

I thought 3rd gens all had the same bolt diameters, front and back...

 

They are for 2nd, 3rd gen. I used them on my 3rd gen

 

Looks like 333 Fabrication cam eliminators: https://333fabrications.com/products/cam-eliminator-kit?variant=40920756453552

Similar concept as the Bison Offroad and PolyPerformance cams, but beefier.

 

That's exactly what they are 333 ,it's where I got them

 

If these are Optoffroad eliminators, they are not interchangeable. They make gen specific models. Intended for off road.
https://optoffroad.com/products/alignment-cam-eliminator-plates?variant=32568997675055

edit - disregard, different brand, but will leave post intact for comparison.

 

Didn't have to realign my truck with these they were great for the short time I had them.

 

The caster bolt is smaller than the camber bolt on the 3rd gens. They are not the same size.

I don’t remember what the 2nd gen bolts look like, but I believe the caster bolt is different from the 3rd gen.

 

Bump

 

2nd Gen and 3rd Gen differ I believe. This should be only good for 2016-2023