Center Console Blanks

I am looking at adding a redarc break controller and adding the control knob to the blanks under the AC controls in my 13 taco but don't know how to access those blanks. If anyone knows of a video that shows this that would be the most helpful.

 

Easy was is to take a small flat head or knife and easily pry it and it will pop right off. That’s how I did mine. There are just two tabs that hold them in, one at top and one at bottom pop one of them out and you’ll be good.

 

I use a knife or pick. most trim tools are not sharp/thin enough.

also, just a heads up but this switch blank will not fit into those openings.
https://www.redarcelectronics.com/us/switch-insert-panel-to-suit-toyota-tundra-tacoma