1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Clarification on Tundra Brake Upgrade potential conflicts

Discussion in '1st Gen. Tacomas (1995-2004)' started by ldvknight, Jun 18, 2013.

  1. Jun 18, 2013 at 7:17 AM

    ldvknight [OP] Member

    Jun 14, 2012
    First Name:
    Federal way, Washington
    01 TRD Double Cab 4x4 SR5
    Snugtop Canopy, Rearview Camera, 3" Ultimate Toytec Lift, Toytec 1" Diff Drop, Toytec Rear Brake Proportioning Kit.
    Has anyone done the tundra brake upgrade (preferably 231) on a set of Pro Comp 52 series 16"x8" with 4.25" backspacing?

    As it is now, the outside wheel face of the stock calipers just...i mean just barely clear the inside face of the wheels. I guess i'm unsure about what part of the tundra calipers exactly will conflict with the wheels. I have read some detailed posts on the forums, but from the close-up pictures (maybe too close-up)...it's just not clear which part of the caliper conflicts.

    Can anyone clarify? Do the tundra calipers conflict at the inside face of the wheel or on the inside radius of the wheels?

    Procomp wheels.jpg
To Top