Clicking/Ticking noise on cold engine

Hi guys, could anybody help me figure out what's causing this noise?
https://youtube.com/shorts/RsuUbgNPaEE?feature=share

Its only occurring at cold starts and cold engine temps and is sync with the accelerator paddle during that time. It gets slightly quieter if I switch on the AC and almost completely disappears when the engine gets warm enough. Pulley? Bearing? ..Power steering issue? need help guys

 

A/C compressor clutch is what it sounds like.

 

Hmm. I’ll get those components checked out and update you

 

BTW the AC is working perfectly fine.. I'm assuming that the compressor would've otherwise affected its performance too right?

 

No not necessary. A/C can be still working, with clutch/compressor that noise.

 

At first I thought youw ere going to refer to the normal clicking issue that a lot of first time 3rd gen owners complain about but oh jeez that sounds very different. I'm curious as well.

 

Sorry for the delayed update but it turned out to be one of the idler pulleys as well as the darn timing belt.

 

What timing belt?

 

I think OP meant the idler pulley and serpentine belt. At least I hope he did.