Colorado B.S. Thread

I wanna say 1.5 inches on each side.

 

Wider or shorter?

 

Wider and taller.

 

Its wider by a whole 3"!!! Damn.

 

perhaps you could just use a bunch of washers on the T-slot to compensate for the width

 

Quality

 

that's my middle name

 

I just measured. 2.5 inches if this other dude measured his 2nd gen right.

 

Bunch of jb weld and @aero3685 welding skills and we'll call it a day.

 

JB weld and a handfull of washers can fix pretty much anything

 

That mean you will be Letting go of the bars you have now?

 

@lobsterbait did I just walk by your truck in an old chicago parking lot about 30 minutes ago? The bed rack appeared to be the same as the one you are trying to sell but the front bumper looked different than the one in your profile picture.

 

Nope. I'm at jacks. Brainstorming my new rack.

 

Well he's brainstorming. I'm sitting here on TW

 

Yeah I think so.

 

You can tuck it farther. This is how mine sits. Once I get the bracket that moves the mirror up I'll move the camera up too.

 

Make sure you are both measuring to the inner bedsides, not the cargo rails. Or both measuring to the cargo rail. Those would make up about 2.5"

 

That's not that bad.

Where's the power supply running to?

 

Comes with a 12v power cable for constant power. It's meant for permanent install

Here is a good review and writeup I used

 

It was thread on here and now I can't find it. I measured 4 different locations, 2.5 inches at the widest point.