Colorado B.S. Thread

It's cool and stuff but I'm genuinely shocked at 'bluegrass' being popular with the 'in' crowd. And by 'in' crowd I mean people snorting coke at red rocks. More power to everybody though, just not a trend I would have predicted.

 

Perfect response

 

Thanks for the invite

 

Happy Friday kids

 

Next time I’ll make sure to set up a Snip N Drink for the group

 

Good. It's a nice but short-ish bike ride for me over to Station 26.

 

Lovely cold fucking morning this morning. Perfect for some Autumn League Rugby.

 

Lovely morning for bullshit

 

Yup! Morning games are done so now time to deal with the cold

 

I need some help. So the first one is going to be a picture of how it currently is with no trim.

The next three photos are options of how to put the trim on, but i just don't know which one would be the correct/least weird looking one.

 

let the foam cure first, in case it expands enough to warp the frame. If it does you'll be cutting it out so you can get the door shut. Best to shut the door now and install some shims between door and frame to keep it in place while it cures.
The trim should cover the gap between frame and drywall.

 

My thoughts too. Wasn't going to start closing anything up until the foam was cured. Did put some tape over the holes the door locks into to keep the foam out. Seems to have worked.

 

I would do #1, but without the trim in the bottom of the door in the left

 

So the 7075 aluminum version still failed even after significant beefing up. I believe limit straps and not taking it off sweet jumps, bro would stop it from self destruction. But instead I made a new top hat from H1100 15-5. Let's see what happens this time!

 

I'm starting to wonder if the shock is bottoming out causing these hats to break. I should look into that eventually.

 

maybe thicker/taller bump stops on the LCA?
Or add washers under the bump stops to raise them?

 

If it is bottoming out it's worth finding out before you crack the coil bucket lol

 

What is your truck’s weight?

 

Are you running 650 or 700# springs?

 

There is a thread somewhere
I think its call ICON WaWaWa lol
Someone sandwiched the the tophats and coilbuckets with a spacer on top of the coilbuckets to prevent breakage.