Come Buy My Wares: Costa Mesa, CA 2nd gen Part Out

Parting out the truck. All Parts located in Costa Mesa, CA 92627. All Parts coming off a 2013 DCLB TRD Sport. Trying not to ship right now. Open to offers on pretty much most things, but please don't think this is Craigs List. With that said here is my stuff:
1) Front Kings 2.5 Ext w/adjustors and 700 lb springssold

2) Rear Kings 2.5 w/adjustors sold

3)At The Helm Front Bumper w/med height bar (pulled the lights off this) Sold with truck

4) JD Fabrication UCA's Sold

5) @Shmellmopwho sliders coated with Rust-Oleum Bedliner spray https://www.homedepot.com/p/Rust-Ol...ubberized-Undercoating-Spray-248657/202097745 Weld On, had to cut one of the lower arm parts off to fit a skid, no strength issues though (for a long bed remember) SOLD

6) BAMF Hangers w/HD Shackle and cross brace plate (never installed) SOLD


7) Iggy Switch Panel, SOLD


8) Going to try and sell the shell with the truck right now. SOLD


9) OEM Leaf Pack w/Icon Progressive AAL (I left the Overload leaf in) gave me like 2" in the rear SOLD


10) Hilux 4x4 Illuminated switch, SOLD

11) Squadron Sports w/ wide cornering, don't have the OG bezels anymore $170


12) Hi Lift Jack Extreme 60" w/ base, handle keeper, slider adapter and bedrail mount, only used a few times. Jack has a little rust on it, but nothing a sponge can't ged rid of. $200


13) Three Nitto Ridge Grapplers 285/75/17. One is in great shape and tons of tread (first pic). The other two have some uneven wear. SOLD

 

What's the mileage on the front and rear king shocks?

 

Probably 60k miles

 

Any desire to sell the pod lites

 

I’m going to see if bumper buyer wants them first. If not for sure.

 

Good seller here, folks

 

No worries. It's always easier selling as a package. Good luck

 

pm’d

 

added a couple small things

 

how much for the supercharger?

 

Please put me in line for the hilux 4x4 switch kit. Thanks

 

pm'd you

 

Rear bumper for sale by any chance??

 

The white one on it or the HC? haha. The HC is gone. I need the rear white one to be able to hold license plate and what not.

 

Dang! I was talking about the HC. Looking for one w/ a tire gate. Thanks. GLWS

 

I wonder how much trimming would be involved to get that ATH bumper mounted to my '09

 

As I’m sure you know issue is the top of the bumper. Headlight to grill transition is flat on 05-011,12-15 has the invert V. But I think I’ve seen it done with pelfrey bumpers before.

 

prices updated to move stuff

 

So many goodies but no compressor

GLWS

 

I actually have one attached to an expedition essentials bed cubby that I’m debating if I want to part with…