Cubby removal?

can any one tell me or give me a link on how to remove this?

 

slim or small flat head screw drive and pull lightly

 

Is it clips that hold in in place?

 

Theres 4 screws on the back of that big panel

To take off the big panel:

1. remove thresh hold trim.
2. unscrew plastic fastener next to dead pedal, remove that trim piece under the fuse box. 2 more clips hold it in.
3. remove the three bolts on bottom of big trim piece under steering wheel. then pull it off. there are 11 clips but they won't break.

Then you can remove the 4 screws on the back of the panel and remove the cubby.

 

Wow I was hopeing it was as sample as just pulling or pushing it out worth a shot thanks for the help

 

It sounds harder than it is, only takes a couple minutes.

 

That's great! Excuse my noob but What's the thresh hold trim?

 

Threshold is the plastic between the seat and outside

 

Perfect! Thanks!

 

Why would you want to remove it? Its like the most versatile part of the 3rd gens!

 

I found a smaller hole I wanted to replace it with I just ordered the 3 panel switch so that's why I was wondering don't know about the OP.
Also last question if anyone can help. The big trim piece under the steering wheel... does it matter which way you pull it off for the clips? Pull up? Towards me? Down? Thanks

 

Yeah just out. i started at the bottom where its already loose after removing the bolts. you have to give it more pressure than you might like but the clips wont break, they are designed to go in and out

 

I did the same I already have the switches just need the panel

 

Nice! How long ago did you order yours? Also what are the switches being used for?

 

I ordered it today I've see pictures of it and haven't been able to find were to order it today it ships the 15! I'm thinking bumper light rock lights and back up lights!