Custom Switch Panels

I'd like to put 4 tall switches in the cubby space and leave the stock spots intact. Can you help me out?

 

Got a LSP7. I thought I missed it!

 

Do you have any overhead switch panels meso?

 

Here is my current set up. Do you have a design that retains the current bottom set up and the pocket and adds a switch to each side of the pocket?

BTW, are there more options for aftermarket standard or tall switches?

 

Hey @mesojdm, I've been off grid in Alaska for the last week or so and just catching up on this thread.
Did you ever make that 5 tall on top with cargo light, ac switch, auto lights, and one tall/clutch cancel on the bottom?

I have internet access and a credit card for the next day or so, Then I'm back off grid for two days. Still very interested.

 

Looking for the same thing, except I need only 3 openings. Could use 4 if you make them.

 

Which part number is this? Or is it still only available as a custom? If I'm looking at it correctly it's got the tall switches on top which is what I'm looking for.

 

Has anyone tried moving the rear window switch on an '18 from the center panel back to the left of driver cubby like it was on '16 & '17? I'd rather have the space in the center as I'm adding heated seats and have BSM. I'm wondering how big of a PITA it is. My other alternative is to move a switch or two from the center to the overhead console which i think would be tougher...

*edit: FYI I'm turning in my '17 lease to purchase an '18 soon and planning parts, yes I know I haven't updated my profile yet

 

Anyone that’s upgraded willing to sell/trade me their old cubby face plate?

I have a 17 TRD OR auto.

Want to relocate my switch pros and retain the old stock look.

 

How about 5 tall across the top and 3 at the bottom (cargo light center, with auto light and inverter on each side)
Sorry, but my OCD needs symmetry... I refuse to duplicate that OEM lower layout.

Yes, Will be ready next week. It will be posted in the other thread

I have not made that. Sooo many variations of switches and configurations it's hard to keep up. 1 panel does not fit all unfortunately

It's custom not listed in OP.

Guys have relocated the cab light switch and window from the left to center console..so going the other way shouldn't be a problem. Only downside is if you cannot source the OEM male/female connectors..splicing and extending are needed. Not a big deal if its done correctly (soldered, heat shrinked, etc)

You want to bolt your SP over the factory panel? CPSPW FTMFW

 

Are you trading this ??

 

Fing hell yea. Thanks @mesojdm

 

I used a dremel to cut out my factory cubby to fit a switch pros, I’m looking for an original factory piece as I plan to my my switch pro module just above the crawl control.

The switch pro module is not for trade

If you really wanted my cut version then by all means let’s trade!

 

No sir, This is how it currently looks at the moment. Looking to go back to the original factory set up.

 

I will have one available in the next couple of weeks. Send me a DM with your address.

 

Any similar designs that retain the center pocket? Can you move the tall up and replace it with a short at the bottom? Maybe 3 standard on bottom plus one cargo and 1 tall on each side of the pocket.

 

SP 9100 flush mount = perfection

 

A question for the good of the group!

I have a 2018 TRD Sport and a few days a go replace the center switch panel with a mesojdm 7 switch one. After putting everything together I noticed my fan only works on high, does anyone had the same issue if yes any solutions. Thank you

 

Sounds like a vacuum issue. I had something like that happen one time. I had to take everything apart and put it back together when I found the hose I forgot to attach

 

Me-so, I need that CPSP brotha thats a nice piece