1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DCSB Relentless Bolt On Hybrid Sliders with Kickout

Discussion in 'Relentless Fabrication' started by camiliosalomanda, Sep 15, 2012.

  1. Sep 15, 2012 at 7:26 PM
    #1
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    I am going to use this space for a write up on installing Relentless Bolt On Hybrid Sliders with Kickout.

    Eric and his team make a high quality product.

    I have painted all the parts that were bare metal.

    Square Washers

    [​IMG]

    U Brackets for Cross Member

    [​IMG]

    Extension Arms for Frame

    [​IMG]

    Driver Side Slider

    [​IMG]

    Passenger Side Slider

    [​IMG]

    All Parts

    [​IMG]

    Primer

    [​IMG]

    BedLiner

    [​IMG]
     
  2. Sep 15, 2012 at 7:29 PM
    #2
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    Tomorrow I will be installing all the parts and I will take pictures of the progress as I do it. I have to go grab some flat dollies to build a small frame to hold them in place.

    Eric feel free to chime in if there is something I have missed here.

    I could possibly install all this backwards, hahaha.

    Any and all advice is welcome.
     
  3. Sep 15, 2012 at 10:11 PM
    #3
    RelentlessFab

    RelentlessFab Tacoma offroad armor fabricating beast Vendor

    Joined:
    Feb 17, 2008
    Member:
    #4772
    Messages:
    13,422
    Gender:
    Male
    First Name:
    Eric
    Eastern side of the Sierras, NV
    Vehicle:
    07 SR5 4x4> 03 SR5 4x4 total> 14 Crewmax TRD
    Had tons on the Taco's.... new truck is pretty stock
    Looking good! Thanks for doing an install write up. :)
     
  4. Sep 16, 2012 at 11:08 AM
    #4
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    So I have been waiting for the rain to let up so I get under the truck and look around to make sure I know where everything goes.

    I am still a little unsure about where the extensions go on the sliders. So we will see what happens there.

    SIDE NOTE: Meanwhile I have put a brisket on the smoker.

    Brisket
    Half Brisket Marinate for 2 hours or longer

    Rub
    Paprika
    Ground Mustard
    Salt
    Pepper
    Oregano
    Onion Powder
    Garlic

    Mop
    Rogue Pink Voodoo Beer with Bacon and Maple
    Liquid Smoke

    Cook
    Smoker at 225 for 30 minutes
    Place Brisket Fat side up
    Smoke 3 hours then mop
    Smoke 3 hours then mop

    [​IMG]

    [​IMG]

    [​IMG]
     
  5. Sep 16, 2012 at 11:11 AM
    #5
    BAMFTACO

    BAMFTACO Pabst Blue Ribbon on ice

    Joined:
    Feb 3, 2010
    Member:
    #30639
    Messages:
    9,748
    Gender:
    Male
    First Name:
    JUAN
    Malibu, CA
    Vehicle:
    Taco
    Lift- stock suspension with light racing uppers,tc coil bucket gusset, timbern bumps ,defined extended shackles with shackle brace. Armor- custom tube bumper, kr fab rear bumper,trail gear wiy 78 in sliders Performance-intake manifold spacer, vibrant resonator Random stuff- kenwood head unit,b&m t shifter, hood bug deflector.
  6. Sep 16, 2012 at 3:26 PM
    #6
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    The brisket has been on for almost 6 hours now.

    I just finished installing the sliders and will be posting pictures as soon as I upload them.
     
  7. Sep 16, 2012 at 4:18 PM
    #7
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    So I have installed the sliders and performed a preliminary test.

    I started by making a rolling cart stand that held the slider in place as close as I could get them to the holes in the frame.

    [​IMG]

    Once in place I positioned them as best as I could

    [​IMG]

    Then I installed the U Cross Member Bracket

    [​IMG]

    As always leave everything loose until all bolts and nuts are in place for fitment reasons.

    Removed the Drive Shaft Cross Member Bolt

    [​IMG]

    Removed the Hose Bracket as it was in the way.

    [​IMG]

    Lining up the holes

    [​IMG]

    Then I clamped the back so that I could keep the holes inline to start installing the bolts.

    [​IMG]

    I installed the U Cross Member Bracket Bolt to the sliders because it is hard to line up.

    [​IMG]

    Then I figured out what the extension arms were for

    Position them inside the boxed in part of the frame and install the bolt for the one closest to the back of the truck first as it is easier to get the front one in because the extension arms from the front will be close to the hole for the back one.

    [​IMG]

    Re-install the Drive Shaft Cross Member Bolt so the the rest of the slider is in place.

    [​IMG]

    Install the rest of the bolts from the outside

    [​IMG]

    Use the square washers on the inside.

    [​IMG]

    Also the last hole in the frame toward the rear I believed was a mounting hole, but the bolts were not long enough to fit through it and get the nut on. So I do not think that is a mounting point.

    [​IMG]

    There is one bolt and washer that goes inside the boxed in part of the Drive Shaft Cross Member. One of those tough spots to get to.

    [​IMG]

    Passenger Side Done

    [​IMG]

    [​IMG]

    [​IMG]

    Driver Side repeat all steps

    [​IMG]

    Driver Side Bolted on

    [​IMG]

    Driver Side Installed

    [​IMG]

    [​IMG]

    Hi Lift Time with Relentless Hi Float Base

    I know everyone had been asking around if the bolt on sliders were strong enough for a Hi Lift.

    [​IMG]

    They flexed a little bit since I did not install the bottom two bolts that require drilling.

    It came close to the pinch weld but never touched.

    [​IMG]

    Done

    [​IMG]
     
  8. Sep 16, 2012 at 4:25 PM
    #8
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    The brisket is also done.

    [​IMG]

    [​IMG]

    [​IMG]
     
  9. Sep 16, 2012 at 4:27 PM
    #9
    Forster46

    Forster46 Very nice how much?

    Joined:
    Jul 20, 2010
    Member:
    #40487
    Messages:
    3,368
    Gender:
    Male
    First Name:
    Nick
    Mount Vernon, WA
    Vehicle:
    The doritos locos taco
    6000k HID's, AUX Reverse Lights, 3" Rough Country Suspension Lift, Pioneer AVH-P4200 Double Din, Underglow and footwell Lights, Camo Seat Covers, Duralast Tool Box, Blacked Out Badges, Grill, Front Emblem, Midland CB Radio, Amber Strobes, POWER REAR WINDOW, cup holder LED's, Firestik 3' in bed, console divider, Ultragauge.
    Very nice.




    I like the brisket write up as well :spy:
     
  10. Sep 16, 2012 at 4:38 PM
    #10
    MYT4CO

    MYT4CO Well-Known Member

    Joined:
    Dec 11, 2011
    Member:
    #68587
    Messages:
    1,241
    Gender:
    Male
    First Name:
    mark
    TX
    Vehicle:
    MYT4CO
    Just cut off all the ifs stuff and stock rear axle.....going big......... wet okole seat covers, red line hood struts, 4xi sliders, bruteforce rear w/ tire carrier, bruteforce front bumper with warn m8000s, bestop soft top, alpine HU and JL speakers, 2nd battery and isolator, arb air compressor, tank and tire fill, FXR projector retrofit by AMBIGUOUS, overhead console by KNINE
    Damn, 8 bolts per side, verrrryy beefy
     
  11. Sep 16, 2012 at 4:39 PM
    #11
    OZ-T

    OZ-T Did you get your precious photos ?

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    24,891
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    Are these the no drill bolt ons OP ?
     
  12. Sep 16, 2012 at 5:05 PM
    #12
    RelentlessFab

    RelentlessFab Tacoma offroad armor fabricating beast Vendor

    Joined:
    Feb 17, 2008
    Member:
    #4772
    Messages:
    13,422
    Gender:
    Male
    First Name:
    Eric
    Eastern side of the Sierras, NV
    Vehicle:
    07 SR5 4x4> 03 SR5 4x4 total> 14 Crewmax TRD
    Had tons on the Taco's.... new truck is pretty stock
    Great write up and the brisket looks delicious! Must be nice having that waiting when done with the install as a job well done.
     
  13. Sep 16, 2012 at 5:05 PM
    #13
    RelentlessFab

    RelentlessFab Tacoma offroad armor fabricating beast Vendor

    Joined:
    Feb 17, 2008
    Member:
    #4772
    Messages:
    13,422
    Gender:
    Male
    First Name:
    Eric
    Eastern side of the Sierras, NV
    Vehicle:
    07 SR5 4x4> 03 SR5 4x4 total> 14 Crewmax TRD
    Had tons on the Taco's.... new truck is pretty stock
    yep :)
     
  14. Sep 16, 2012 at 5:16 PM
    #14
    WheelinJ91

    WheelinJ91 Well-Known Member

    Joined:
    Dec 7, 2011
    Member:
    #68322
    Messages:
    321
    Gender:
    Male
    First Name:
    John
    Edmonton,AB
    Vehicle:
    2012 TRD DCSB
    Airaid Intake, MBRP Exhaust, Toytec OME 3" lift w/AAL, Flip-kit, LR UCA's, Weathertech Floor mats, hood and window deflectors.
    If you had added the bolts to the bottom (where drilling is required) do you think it would have not flexed? They look like even without the bottom bolts that they would hold if you lost clearance and save your rockers.
     
  15. Sep 16, 2012 at 5:27 PM
    #15
    OZ-T

    OZ-T Did you get your precious photos ?

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    24,891
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    Sweet
     
  16. Sep 16, 2012 at 6:00 PM
    #16
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack

    Thank you.

    Unfortunately the brisket was bland. Should have marinated it over night instead of only two hours. Crock Pot it goes with more mop.
     
  17. Sep 16, 2012 at 6:01 PM
    #17
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    Thanks Eric. Again great product man. I think I am going to drill those holes in the bottom and add the final bolts just to complete the ordeal.
     
  18. Sep 16, 2012 at 6:03 PM
    #18
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    Yeah these are super beefy. I dont think you need the bottom two bolts unless you are just super careful.

    I can imagine once I let them sit a bit and then go back and torque them a bit more they wont flex at all.

    I havent been working out so I am kind of weak on the wrenching.
     
  19. Sep 16, 2012 at 6:07 PM
    #19
    camiliosalomanda

    camiliosalomanda [OP] Well-Known Member

    Joined:
    May 9, 2008
    Member:
    #6503
    Messages:
    184
    Gender:
    Male
    McKinney, Texas
    Vehicle:
    Super White
    Grill Craft Hella 500 Bed Aux Wet Okole Wet Okole Arm Rests Weather Tech Magnaflow OS Ram Night Breakers Rocky Mounts Custom IPOD Dock Pioneer AVH P4100 Relentless Sliders AnBCustomFab Bed Rack 3 Inch Icon Lift with leaf pack
    So while I was under there I noticed that my passengerr side CV boot clip came off the top end of the boot.

    DAMMIT.

    I just had this fixed from the sway bar crushing it when it popped off.

    http://www.tacomaworld.com/forum/2n...rained-cv-boot-help.html?highlight=lower+link



    Thoughts? I am wondering if I need to get the diff drop for my truck since I have the 3 inch lift.

    I read that it is not necessary and some say it does not even help.

    Again Thoughts?
     
  20. Sep 16, 2012 at 6:27 PM
    #20
    WheelinJ91

    WheelinJ91 Well-Known Member

    Joined:
    Dec 7, 2011
    Member:
    #68322
    Messages:
    321
    Gender:
    Male
    First Name:
    John
    Edmonton,AB
    Vehicle:
    2012 TRD DCSB
    Airaid Intake, MBRP Exhaust, Toytec OME 3" lift w/AAL, Flip-kit, LR UCA's, Weathertech Floor mats, hood and window deflectors.
    The diff drop is a must i think with a 3" on a 4x4, but as i have not lifted my truck yet (this weekend :D) ill let someone else answer that
     
To Top