Decked Systems

Do any of you have a Decked system in a Gen 3 and move if over to a Gen 4? I know the beds are different but are the dimensions that different?

 

Doubt it will fit being that you have to trim a bed mat from a 3rd gen to make it fit.

 

Trim in length or width(s)

Just curious.

 

Wheel well position....Let me see if I can find a photo. That would be it in to context.

ETA:
https://www.tacomaworld.com/threads...n-to-4th-gen-today-will-my-decked-fit.841840/

https://www.tacomaworld.com/threads...th-gen…-a-few-questions.837872/#post-30003168

 

I looked at dimensions. There are some stark changes.
Bed length basically the same
Width is wider at the wheel wells by 2 inches looks like and there is a small area in front of the wells on the 4th gen. So looks like maybe not? I saw the other post but it was referring to a long bed I thought.

 

The width by the wheel arches. Barely though like 3/4th of an inch if that. I know because I did a horrendous job of slicing a 3rd gen mat I had around and threw it in my 4th gen