Delete ignore old post

Got a working seatbelt and assembly that would fit a 2000 3.4L?

 

I only have regular cab front belts in tan and the rears from extra cab in grey. no fronts for extra cab

 

Alright, thanks for checking. So it sounds like the rears aren't interchangeable with front belts?

 

I'll check tomorrow see if they work like that. It would be nice if they did.

 

What truck did the 4:10 front diff come out of?

 

96 extra cab

 

Not 100% what the status of my parts truck diff is. I just know I got 4WD to work shortly before the engine died. I'll be tearing it down within the next week.

How many miles on the 96 if it still had the gauge cluster when you got it?

 

It has 213,016

 

Interesting. My 4Runner has 299,800 so I'll have to see how my front diff is doing.

 

Ok well its pulled and ready to ship

 

ill take a set of lower control arms for $40 shipped

 

Interior fuse box cover -tan- 2000 ish?

 

Do you have the rear most cross-member for a ‘97?

 

PM'd you both

 

Any good driver's side door seals? That go all the way around the door - the one attached to the cab?

 

I'll take a look and pm you

 

So All the drives side seals are torn BUT..... O took the passenger side and put in on the drivers side and it looks like a good fit.

 

That's slick. I think I'll just man up and buy a driver's side new one.

 

Pulled the top end on the 2.7 this morning and found the knock. It is in the 2nd cylinder from the front, but the block and cylinders look clean.
$300 for the head $200 for the block

 

The spindles have ABS?