Delete

edited.

 

pm sent for a set of 3/4".
thanks!

 

PM'ed about extensions.

 

1/2" spacers are available again.
https://www.instagram.com/p/B4pmEJFgTOA/?utm_source=ig_web_button_share_sheet

 

This new design will be available soon. Same contoured trim matching shape at a lower price point. They will already be colored black, so no need to paint them. Same strength of aluminum, any height from 1/2" up to 1.75" without need for extension. Generally I would like to stick to 1/4" size increments, but custom heights are doable. Stocking all of these bolt lengths isn't going to be doable for me, so that would be on the buyer.

The only reason the prices even differ is to cover material costs.

$45 - 1/2" pair
$50 - 3/4" to 1" pair
$55 - 1-1/4" to 1-1/2" pair
$60 - 1-3/4" pair

USA shipping would be $7.90 for most of those, $9.30 if I cannot fit the 1-3/4" in a small flat rate box. PayPal fees would be an additional as well, but I also take Venmo which has no fees.

Black Delrin material with 6061-T6 Aluminum core.

 

Shaped Spacers V2 look killer!

 

Anybody over 6'4" get these? Which size? I would like to do something to make the drive a bit more comfortable but not sure this would be my answer.

 

You can stack washers under the rear rails to get a feel for the height that you want to order and check head clearence.

 

Are these available yet? (new design)

 

Yes and no.

I have the tooling made to produce, but am fresh out of raw materials. It's a $300 commitment to get more material, so I need a few buyers first.

I see most people seem to be going for the cheaper versions, so I'm a bit reluctant to continue with these. Normally I would just buy the material free of worry, but spacer sales have been quite slow lately (on my end).

 

Man I'm sorry if you already posted. But what's the difference between v1 and v2?

 

PM'd you. Interested in a couple sets of the 1" blocks. Thanks!

 

Very nice work

 

V1s were solid unfinished aluminum. The V2s are aluminum cores with shaped delrin. So, no finishing is required, plus price drop.

 

Hi, I am looking to make a purchase on 1/2 inch spacers, but my apparent attempts at PM'ing you do not seem to be working. Are these still pending production? Thanks.

 

PM when you have these spacers - I'm in for a set! Very, very happy with the shift knob I bought.

 

I know we're all shaped differently (torso and legs) but I'm curious, what size did y'all go with? I'm 6' with a 33" inseam and thinking of going with 1/2" spacers to give me a more upright sitting position.

 

A half inch is noticeable. We started with 1.0in on the passenger side and ended up needing 1.5in. Each definitely feels different. I'm 6ft with a short inseam (31in). I have no head height issues (no sunroof).

You can always check with a stack of washers to dial in what you need.

 

Is the V2 available to buy?

 

When will theses be ready