.

.

 

Maybe Depending on cost...

 

What is costing going to be roughly?

Edit: how will this effect the pop n lock. I haven’t installed yet but running the wire down passenger side and using the pnp harness. So with this wouldn’t the tailgate unlock on first press as well? Now that I think about it, that might be why I didn’t pull the trigger on the passenger smart handle.

Any way to have the passenger smart handle with this pnp to unlock on 1st with drivers while the back requires 2 press AND have the tailgate on 2nd press as well?

 

I am still confused as to how this will work with the passenger smart handle. Right now, it is tapped into the drivers smart handle at the ECU so it basically extends the same functionality of the drivers door to the passenger door. Does this harness allow the passenger smart handle to operate differently?

 

I am interested in a harnest for the front passenger smart door handle. Count me in.

 

Interested.

 

So right now i have the HU programmed where if i am using the FOB, 1 press opens the Drivers Door, 2 presses opens all the doors. When touching either the Drivers handle or Passenger handle, all doors open. So if i change the setting in the HU so 1 touch of either front handle opens only the driver door, if i use this harness, it will open both the front doors?

 

I am also interested in a harness for the front passenger smart door handle.

 

Do you have any installation pictures?

 

If you happen to own one of my PNP Harnesses already and choose to send it to me to be modified, it will just be an Adjustment fee of $25. The cost of the IC1 PNP HARNESS is $45. If you do not own the IK1 PNP HARNESS it is $45. I will do a COMBINATION PACKAGE for $80 (FREE SHIPPING LOWER 48)

I will post this above as well

 

Intriguing... so this harness will allow me to wire up a passenger smart handle without changing my HU settings from "drivers door only" and will not screw up my Pop n Lock wired to my passenger side lock?

 

Added to your quote above

The posts above still have me confused, I don’t know why it’s not clicking for me. Or what I’d need additionally on top of the pop n lock pnp harness (or if it’s a matter of adding additional wires to that harness which I could do)

 

I’d like to buy just the IC1 harness when available. Thanks!

 

In. I think I'd just need IC1 harness.

 

PM caribe. He will add you to the list

 

Ok thanks!

 

Has anyone who's received their harness install it yet?

 

I don’t think Katie is accepting orders yet. She’s putting a list together of people that are interested for now. Sounds like she needs a 100 people to get this going. I see 3 people on the list so far.

 

So I only see 3 people total signed up for this (including myself). Will this still be made @caribe makaira ?

 

sign me up