1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Devil Horns Emblem for 2005+ Tacoma

Discussion in 'Diaz Fabrication' started by Andres, Sep 30, 2008.

  1. Sep 30, 2008 at 5:29 AM
    #1
    Andres

    Andres [OP] Well-Known Member Vendor

    Joined:
    Sep 27, 2008
    Member:
    #9514
    Messages:
    1,015
    Gender:
    Male
    First Name:
    Andres
    Hawthorne, CA
    Vehicle:
    Toyota Tacoma TRD off-road
    Welcome to the launch of custom emblems by Diaz Fabrication

    What started as a hobby has turned into a competitive approach to offer a variety of custom aluminum emblems for front grilles and hitch covers. All emblems have been designed, fabricated and inspected to offer the best quality at a reasonable price. This batch will kick-off a total of 6 new emblems and continue to bring new emblems every four months.

    [​IMG]

    Please visit DiazFabrication.com to pre-order your own emblem today!
    Feel free to reach me at: andres@diazfabrication.com
    PM me for discount code, code only available to TacomaWorld members.

    [FONT=&quot]201[FONT=&quot]5[/FONT] March batch: [/FONT]
    [FONT=&quot]Batch is open for pre-order for Devil Horns and Model T until March [FONT=&quot]9th[/FONT].[/FONT]

    [FONT=&quot]Finish treatment: [/FONT]
    [FONT=&quot]Emblems will be sent out for finish treatment around March 12th with an expected return date of March 27th.[/FONT]

    [FONT=&quot]Shipping: [/FONT]
    [FONT=&quot]Emblems will ship as soon as they come back from finish treatment starting March [FONT=&quot]27[/FONT]th until [FONT=&quot]April[/FONT] [/FONT][FONT=&quot][FONT=&quot][FONT=&quot]10[/FONT]th[/FONT]. Be advised that the shipping carrier will need a few days for delivery.

    [/FONT]

    [FONT=&quot][FONT=&quot]Discount code!
    [/FONT]
    [/FONT]
    [FONT=&quot]All TW members can receive a [FONT=&quot]discount, feel free to ask for discount code[FONT=&quot] (discount will be applied to shipping cost).[/FONT][/FONT]
    [/FONT]


    [FONT=&quot][FONT=&quot]Devil Horns, natural raw aluminum [/FONT]
    [FONT=&quot]Show below is an example of the texture after being fabricated; small visible marks left by the CNC machine are visible on the surface. People will often ask for a natural finish if they decide to custom paint it, powder coat it, etc. [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Shot penning [/FONT]
    [FONT=&quot]This process consists of small round metallic particles with sufficient force to create surface deformation.[/FONT]
    [FONT=&quot]The result is an increased stress layer that hardens the outer area of the material making it stronger and more durable while leaving a grainy "sand-like" texture at the surface. Shot penning will come standard with any anodizing color.[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Anodize[/FONT]
    [FONT=&quot]Anodize is a process where color is added to the aluminum at a microscopic level using chemicals and electric current. [/FONT]
    [FONT=&quot]The thickness of the anodize layer averages only a few microns of an inch, virtually noting.[/FONT]
    [FONT=&quot]For best results, shot penning will be standard on any anodized emblem. [/FONT]
    [FONT=&quot]Unfortunately due to weather conditions such as sun light, heat, moisture and salty conditions the anodize can fade over time. [/FONT]

    [FONT=&quot]Cherry red anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Gun Metal Black anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]


    [FONT=&quot]Speedway Blue anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Horns on Fire anodize with shot penning[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [​IMG]

    [FONT=&quot]Single color powder coat[/FONT]
    [FONT=&quot]Powder coat is simply paint in the form of powder.[/FONT]
    [FONT=&quot]Once each emblem has been sprayed with the color powder it is "baked" in an oven at 370 degrees Fahrenheit.[/FONT]
    [FONT=&quot]The result of this process is a hard form of paint much more durable than ordinary paint and about .012 thick on average.[/FONT]

    [FONT=&quot]Shot penning with clear powder coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Black Powder Coat (Non-shiny, mat finish)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Red Powder Coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Nautical Blue powder coat [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]White Powder Coat[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polishing[/FONT]
    [FONT=&quot]Polished option removes the CNC marks and uses a polishing wheel to smooth the surface to a mirror-finish. After the emblem has been polished a layer of clear powder coat will be applied to preserve the shine. This is the closest to an original factory emblem finish.[/FONT]

    [FONT=&quot]Polished with clear powder coat (as best as it can get for that “factory installed” appearance)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and black anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and Cherry red anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished and Speedway blue anodize[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Polished Horns on Fire anodize [/FONT]
    [FONT=&quot][​IMG][/FONT]

    [/FONT]
    [FONT=&quot]Devil Horns: [/FONT]
    [FONT=&quot]1995-2000 Tacoma (emblem width: 4.29 inches) [/FONT]
    [FONT=&quot]2001-2004 Tacoma (emblem width: 4.45 inches) [/FONT]
    [FONT=&quot]2005-2010 Tacoma (emblem width: 5.50 inches)[/FONT]
    [FONT=&quot]2011+ Tacoma (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1999-2002 Tundra (emblem width: 5.08 inches) [/FONT]
    [FONT=&quot]2002-2006 Tundra (emblem width: 6.30 inches) [/FONT]
    [FONT=&quot]2007+ Tundra (emblem width: 6.69 inches) [/FONT]

    [FONT=&quot]1998-2001 4Runner (emblem width: 4.05 inches, drilling on grille may be required)[/FONT]
    [FONT=&quot]2002-2004 4Runner (emblem width: 4.72 inches) [/FONT]
    [FONT=&quot]2005-2009 4Runner (emblem width: 5.50 inches) [/FONT]
    [FONT=&quot]2010+ 4Runner (emblem width: 5.91 inches) [/FONT]

    [FONT=&quot]2003-2006 Rav4 (emblem width: 5.13 inches)[/FONT]
    [FONT=&quot]2006-2008 Rav4 (emblem width: 5.92 inches) [/FONT]
    [FONT=&quot]2008-2011 Rav4 (emblem width: 6.30 inches) [/FONT]

    [FONT=&quot]1992-1995 Pickup (emblem width: 4.02 inches)[/FONT]
    [FONT=&quot]2003-2008 Corolla (emblem width: 4.31 inches) [/FONT]


    [FONT=&quot]Custom Emblems![/FONT]

    [FONT=&quot]Emblems are made of 100% American made materials, 6061 T6 aircraft grade aluminum 3/8” thick. Emblems will have a black type3 hard anodize coating with a top brushed aluminum finish followed by a layer of protective sealer to protect the brushed aluminum surface. [/FONT][FONT=&quot]All emblems can be used in the front of an original Toyota with the use of a mid bracket (sold separately) or in the rear as a hitch cover with the use of a hitch bracket (sold separately). [/FONT]With a unique 9 hole pattern in the rear, emblems can be attached using #10-32 to an after market grille such as a satoshi grille, mesh grille or billet grille, heck they can even be a neat ornament on your wall!

    [​IMG]

    [FONT=&quot]Model T[/FONT]
    [FONT=&quot][FONT=&quot]Large Model T (emblem size 6.8 in. by 4.7 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Model T (emblem size 5.5 in. by 3.8 in, recommended for oval width 5.5in. and below)
    [/FONT]
    [/FONT][/FONT][FONT=&quot][​IMG]

    [/FONT]
    [FONT=&quot]Bat[/FONT][FONT=&quot]
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot]Large Bat (emblem size 6.8 in. by 4.6 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Bat (emblem size 4.8 in. by 3.3 in, recommended for oval width 5.5in. and below)
    [/FONT][/FONT][/FONT][/FONT][FONT=&quot][​IMG]

    [/FONT]
    [FONT=&quot]Man of Steel
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]Large Man of Steel (emblem size 6.5 in. by 4.8 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Man of Steel (emblem size 5.4 in. by 4.0 in, recommended for oval width 5.5in. and below)
    [/FONT][/FONT][/FONT][/FONT][/FONT]
    [FONT=&quot][​IMG]

    [/FONT][FONT=&quot]Spinal[/FONT][FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]
    [/FONT][/FONT][/FONT][/FONT][/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]Large Spinal (emblem size 3.9 in. by 5.0 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Spinal (emblem size 3.4 in. by 4.3 in, recommended for oval width 5.5in. and below)
    [/FONT][/FONT][/FONT][/FONT][/FONT][/FONT][FONT=&quot]
    [​IMG]

    [/FONT]
    [FONT=&quot]Autotron
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]Large Autotron (emblem size 5.6 in. by 5.5 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Autotron (emblem size 4.6 in. by 4.5 in, recommended for oval width 5.5in. and below)
    [/FONT][/FONT][/FONT][/FONT][/FONT][/FONT]
    [FONT=&quot][​IMG]

    [/FONT]
    [FONT=&quot]Deceptible
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]Large Deceptible (emblem size 4.9 in. by 5.5 in, recommended for oval width 5.5in. and above)
    [FONT=&quot]Small Deceptible (emblem size 4.0 in. by 4.5 in, recommended for oval width 5.5in. and below)
    *Forgive the lack of black anodize in this emblem, this is an error but the final product will have black anodize
    [/FONT][/FONT][/FONT][/FONT][/FONT][/FONT]
    [FONT=&quot][​IMG]

    [/FONT]Bigote
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]
    Large Bigote (emblem size 7.9 in. by2.0 in, recommended for oval width 5.5in. and above)

    [FONT=&quot]Small Bigote (emblem size 6.0 in. by 1.5 in, recommended for oval width 5.5in. and below)
    [/FONT][/FONT][/FONT][/FONT][/FONT]

    [​IMG]

    [​IMG]

    [FONT=&quot]Mid Bracket[/FONT]
    [FONT=&quot]Mid bracket is a mounting hardware required for the installation of Model T emblem onto original Toyota grilles. This bracket is installed between the original grill and the Model T emblem. While designing the Model T emblem, I came to realize that by having a standard bracket mounted on the original Toyota grille would allot me not only to mount other types of emblems, but also facilitate the fabrication process, minimize material use and diversify the use of Model T and further upcoming emblems. Mid Bracket is not needed if using mesh/satoshi after market grilles. Every Mid Bracket will be shot penned and have black hard anodized and brushed aluminum on the logo. (Below are products not yet treated for finish)
    [/FONT]

    [FONT=&quot][FONT=&quot]2005-2010 Tacoma (emblem width: 5.50 inches) [/FONT]
    [FONT=&quot]2011+ Tacoma (emblem width: 6.30 inches) [/FONT]
    [FONT=&quot]2007+ Tundra (emblem width: 6.69 inches)
    [/FONT]
    [​IMG]

    [​IMG]

    [​IMG]
    [/FONT]
    [FONT=&quot][FONT=&quot]
    Hitch bracket
    [/FONT]
    [FONT=&quot]Forgive my Raw presentation of the hitch bracket, as of now it is only a 3D printed model of the final product. Hitch bracket will be a simple [/FONT]
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]2-piece welded[/FONT][/FONT] aluminum bracket shot penned and black anodized and will be available for class 3 or 4 type receivers (2.0" by 2.0").
    [/FONT]
    [/FONT]
    [FONT=&quot][FONT=&quot][FONT=&quot][FONT=&quot]
    [/FONT]
    [/FONT]
    [​IMG]

    [​IMG]

    [​IMG]
    [/FONT]
    [/FONT]

    [FONT=&quot]Installation requirements:[/FONT]

    [FONT=&quot]*5/32" Allen wrench[/FONT]
    [FONT=&quot]*5 minutes of your time (in most cases)[/FONT]
    [FONT=&quot][​IMG][/FONT]

    [FONT=&quot]Installation Info:[/FONT]
    [FONT=&quot]There's very little skills required for the installation of Devil Horns. I have made it as easy as I could for anyone to install this emblem using 10-32 screws and washers with minimal time. This would be the typical installation scenario: [/FONT]
    [FONT=&quot]*Open the hood of your vehicle.[/FONT]
    [FONT=&quot]*With your fingers, gently remove the emblem by pressing the tabs closer to each other (older models may require removing screws).[/FONT]
    [FONT=&quot]*Locate Devil Horns / Mid Bracket onto factory or after market grill and finger-tighten provided screws and washers to the emblem.[/FONT]
    [FONT=&quot](If using Model T emblem, install emblem onto Mid Bracket first)[/FONT]
    [FONT=&quot]*Snugly tighten all screws with a 5/32" Allen wrench also know as hex key.[/FONT]
    [FONT=&quot]*Take your truck for a ride to display your newly installed emblem. = ][/FONT]

    [FONT=&quot]It brings me joy reading about every one of you and receiving pictures of your cars/trucks. I will try my best to keep these emblems available, but I fear someday I will have stop making them. For the time being, I'm having my kicks making them for Toyota vehicles and I hope to keep making them for some time. It is my pleasure to bring you a unique item not sold or made anywhere else. [/FONT]

    [FONT=&quot]Sincerely, [/FONT]

    [FONT=&quot]Andres Diaz[/FONT]
    [FONT=&quot]Fabricating Devil Horns since 2008[/FONT]
    andres@diazfabrication.com

    [FONT=&quot]Rules:[/FONT]
    [FONT=&quot]1) PRODUCT OFFERED TWICE A YEAR ONLY[/FONT]
    [FONT=&quot]Devil Horns is fabricated twice a year usually in the months of April and October due to an agreement with Toyota’s legal department. [/FONT]
    [FONT=&quot]No Devil Horns will be sold outside of these two time frames per year.[/FONT]

    [FONT=&quot]2) LIST[/FONT]
    [FONT=&quot]All year long I update a list of people interested in purchasing Devil Horns and notify them once the current batch is open. If you are interested in Devil Horns please send me a PM or email and I will gladly put you in that list. [/FONT]

    [FONT=&quot]3) BE CAREFUL WHERE YOU SELL DEVIL HORNS!!![/FONT]
    [FONT=&quot]Copyright infringement is a serious offense and eBay is notorious for tracking illegal and unlawful content, copyright infringements, etc. Please don't sell this emblem on eBay; I may never get another change in making them again. If you have an emblem for sale I can help you find a buyer or you can safely post what you have for sale at the following site, a price and brief description is sufficient: [/FONT]
    [FONT=&quot]http://www.tacomaworld.com/forum/buy...de-andres.html[/FONT]
     
    Last edited: Feb 22, 2015
  2. Sep 30, 2008 at 7:41 AM
    #2
    lsocoee

    lsocoee My hair is all natural Staff Member

    Joined:
    Feb 9, 2007
    Member:
    #872
    Messages:
    10,104
    First Name:
    Hotdog
    Vehicle:
    2007 PreRunner SR5 Double Cab
    Wet Okole Underwear
    neat. Do you have any pics of how it attaches?
     
  3. Sep 30, 2008 at 7:48 AM
    #3
    HerNameIsLucy

    HerNameIsLucy I miss Lucy. :-(

    Joined:
    Jul 31, 2008
    Member:
    #8256
    Messages:
    3,047
    Gender:
    Male
    First Name:
    John
    Equador. Don't know why.
    Vehicle:
    RIP Lucy.
    She's gone but not forgotten.
    Hey your ebay ad says it only fits 05 and up (with the 4 allen bolts). how hard would it be to mod it to fit the 1st gen tacomas? think some 3M tape would hold it?
     
  4. Sep 30, 2008 at 8:02 AM
    #4
    Andres

    Andres [OP] Well-Known Member Vendor

    Joined:
    Sep 27, 2008
    Member:
    #9514
    Messages:
    1,015
    Gender:
    Male
    First Name:
    Andres
    Hawthorne, CA
    Vehicle:
    Toyota Tacoma TRD off-road
    I don't have any pics of the back where it bolts but I assure you it's held tight. The slip locking washers make a big difference, they maintain tension between the head of the bolt and the surface that is is bolted on while normal washers wouldn't do that.
    The reason why they are only for 2005+ tacomas is that the outter oval varies from each toyota Model. The oval for the first generation tacoma is much smaller. I'm waiting for a grill to be shipped so i can take measurements and begin fabrication. I have about 20 emblems left for 2005+ tacomas, after that no more devil horns.
     
  5. Sep 30, 2008 at 8:11 AM
    #5
    luk8272

    luk8272 Poodoo

    Joined:
    Feb 24, 2008
    Member:
    #4929
    Messages:
    5,842
    Gender:
    Male
    First Name:
    Lucas
    Kaplan, Louisiana
    Vehicle:
    07 Silver4dr. 4x4, V6 Shortbed
    5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Wheeler's Add A Leaf HD Pack, Icon 2.0 rear shocks, Toytec 3" lift up front with Total Chaos UCA's, Debadged, Billet Grille,TRD Offroad rims/17x9 Pro comp 6001 rims, Duratracs 265/75/16 or 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Pro-dry AFE filter. Extended Differential Breather, ABS on/off, 6000k LEDs from CSJumper, heads/fogs, ScanguageII, Devil horns, Devil horns on third brake light, Mounted 60" Highlift, Mounted Tool Box, Wet Okole Front/Rear Seat Covers, TW sticker, Midland Handheld CB,Painted engine cover, Revenge Fab Sliders, ARE Topper, Weather tech Floorliners.
    Thats pretty neat man. Good work.
     
  6. Sep 30, 2008 at 8:14 AM
    #6
    Agent475

    Agent475 "Mark It Zero"

    Joined:
    Aug 28, 2008
    Member:
    #8829
    Messages:
    2,882
    Gender:
    Male
    Waldorf, MD
    Vehicle:
    2006 Red TRD Sport
    Hood Struts, 3" Tuff Country Lift, Shortie Antenna, WeatherTechs, Tinted front windows, custom TRD seat covers, custom pedals, debadged, custom USMC badging, quasi-functional hoodscoop (i.e. I cut it open), black front Yota emblem, Tailgate Theft-Prevention mod, Horn Relocation mod, Old Man Emu Carrier Bearing Drop, Brighter Backup Lights Mod, Smittybilt Reciever Hitch Tow Point, currently working on Satoshi Grill Mod
    Dude- that looks awesome... I may purchase one...
     
  7. Sep 30, 2008 at 8:48 AM
    #7
    thebigk

    thebigk 6 Double 5 3 2 1

    Joined:
    Aug 25, 2008
    Member:
    #8770
    Messages:
    3,350
    Gender:
    Male
    First Name:
    Ken....
    Odessa, TX
    Paint it Orange

    UT!!!! Hook em Horns!
     
  8. Sep 30, 2008 at 9:02 AM
    #8
    Casey05Taco

    Casey05Taco Well-Known Member

    Joined:
    Aug 26, 2008
    Member:
    #8781
    Messages:
    1,997
    Gender:
    Male
    First Name:
    Casey
    Penngrove, CA
    Vehicle:
    05 Tacoma Prerunner
    trd seat covers, bed mat, tinted windows, debadged, mud flaps removed, tinted tails, blacked out center console, Black Rims, 6000k HID in highs and fogs, blacked out front emblem, Pioneer AVH-4300DVD, Gauge Cluster, lower valence, retrofitted, audio system, Maxtrac Spindles, Billies
    finally made it here i see lol. I think these things look awesome especially the black one
     
  9. Sep 30, 2008 at 9:09 AM
    #9
    tacomaman06

    tacomaman06 Carolina Alliance: Lead, follow, or get the hell o Staff Member

    Joined:
    May 1, 2007
    Member:
    #1475
    Messages:
    26,351
    Gender:
    Male
    First Name:
    Will
    York,South Carolina
    Vehicle:
    '13 Silverado ext cab
    friggin awesome man!! if you ever make one for the first gen tacoma, in black, im definitely getting one!!!
     
  10. Oct 1, 2008 at 6:57 AM
    #10
    Flyin' Squirrel

    Flyin' Squirrel Well-Known Member

    Joined:
    Jun 6, 2008
    Member:
    #7149
    Messages:
    59
    Gender:
    Male
    Austin, Tx
    Vehicle:
    06 SR5 Longbed 4X4
    TRD Sport, 3" Revtek suspension lift, Borla exhaust, AFE Pro Dry filter, Westin chrome nerf bars, Moto Metal chrome rims, limo tinted rear windows, Devil Horns grill emblem, extra bed D-rings
    That is way cool. I just ordered one.
     
  11. Oct 2, 2008 at 11:48 AM
    #11
    blake1012

    blake1012 Go Braves!

    Joined:
    Jul 19, 2008
    Member:
    #8023
    Messages:
    1,124
    Gender:
    Male
    First Name:
    Chazz Michael Michaels
    Duluth, GA
    Vehicle:
    2003 ext cab. tacoma.
    8000k HID's, Weathertech Digital Fit floor liners, Rhino Lined bed, 16x8 TRD Ivan Stewart wheels, bull bar, step rails, Redline Tuning hood struts, low profile tool box
    x2........good work.....
     
  12. Oct 2, 2008 at 12:16 PM
    #12
    neontrail

    neontrail ✈ ✈ ✈ ✈ ✈ ✈ ✈

    Joined:
    Apr 9, 2008
    Member:
    #5844
    Messages:
    10,154
    Gender:
    Male
    Idaho
    Vehicle:
    2004 NISSAN XTERRA XE/SE
    De-badged, Tint 20%, Blue 48 LED dome-light, .......
    amazing!! LOVE the horns. Great product.

    You should charge MORE! ..But wait a few days until AFTER I order mine. :D
     
  13. Oct 3, 2008 at 3:44 AM
    #13
    David Tarantino

    David Tarantino Well-Known Member

    Joined:
    Jun 20, 2008
    Member:
    #7428
    Messages:
    6,144
    Gender:
    Male
    N.J.
    Vehicle:
    08 tacoma
    i have one i can post pics this weekend
     
  14. Oct 3, 2008 at 7:07 PM
    #14
    BioMed80

    BioMed80 Well-Known Member

    Joined:
    Sep 12, 2008
    Member:
    #9176
    Messages:
    158
    Gender:
    Male
    Colorado Springs, CO
    Vehicle:
    09 Regular Cab
    3" ReadyLift Kit, 31x10.5x15 General Grabber AT2s, AFE Drop-In, Bull Bar, Hella 500FF, Secondary Filter Removed
    Just ordered mine. Can't wait to get it. Andres has been great to work with up to this point. Very quick responses and service. I'll post with updates after I get it and put it on. Thanks Andres.
     
  15. Oct 3, 2008 at 7:15 PM
    #15
    EquinsuOcha

    EquinsuOcha Bourbon

    Joined:
    Mar 18, 2008
    Member:
    #5368
    Messages:
    3,674
    Gender:
    Male
    First Name:
    Casey
    Ft Worth, TX
    Vehicle:
    07 PreRunner
    AFE Drop-in filter, Wet Okole seat covers, Hifonics 6.5" components in front, MA Audio midbasses in rear, Kicker 8", RE Audio 2 channel for components, Elemental Designs bridged 2-channel for sub, CB, Devil Horns, Rancho QuickLift, Rancho RS9000XL rear shocks, Toytec AAL, stickers, things and stuff.
    I've got one. A lot of people have done doubletakes when they see it. I haven't received any complaints either!

    [​IMG]
     
  16. Oct 23, 2008 at 7:34 AM
    #16
    Ben_Schwarz_09

    Ben_Schwarz_09 Well-Known Member

    Joined:
    Sep 17, 2008
    Member:
    #9310
    Messages:
    47
    Gender:
    Male
    Texas
    Vehicle:
    2008 TRD Double Cab PreRunner
    TRD Drop-In Air Filter, TRD Cat-Back Exhaust, IPod Plug In Capibility, Upgraded Alarm System
    how do i buy these things, i want one... do i need to go to ebay or wut?
     
  17. Oct 23, 2008 at 7:40 AM
    #17
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,358
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    x2!
     
  18. Oct 23, 2008 at 7:51 AM
    #18
    neontrail

    neontrail ✈ ✈ ✈ ✈ ✈ ✈ ✈

    Joined:
    Apr 9, 2008
    Member:
    #5844
    Messages:
    10,154
    Gender:
    Male
    Idaho
    Vehicle:
    2004 NISSAN XTERRA XE/SE
    De-badged, Tint 20%, Blue 48 LED dome-light, .......

    look at the 1st post in this thread :)
     
  19. Oct 23, 2008 at 7:53 AM
    #19
    Ben_Schwarz_09

    Ben_Schwarz_09 Well-Known Member

    Joined:
    Sep 17, 2008
    Member:
    #9310
    Messages:
    47
    Gender:
    Male
    Texas
    Vehicle:
    2008 TRD Double Cab PreRunner
    TRD Drop-In Air Filter, TRD Cat-Back Exhaust, IPod Plug In Capibility, Upgraded Alarm System
    ...yeah i saw that after
     
  20. Oct 23, 2008 at 7:55 AM
    #20
    lsocoee

    lsocoee My hair is all natural Staff Member

    Joined:
    Feb 9, 2007
    Member:
    #872
    Messages:
    10,104
    First Name:
    Hotdog
    Vehicle:
    2007 PreRunner SR5 Double Cab
    Wet Okole Underwear
    tomorrow is payday, if I remember, I might have to come back here tomorrow...
     
To Top