DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

Yeah. You did mention the plug.

I realized that I don't have a torque wrench that goes to 174 ft/lbs. The videos I saw has them taking off the rotor and knuckle just to get the CV axle out.

I should probably have a little experience with the CV anyway.... Just in case I break one at the mall.

 

Yeah I have the "high" power usb that come with it now. I just ran it the way they tell you. I dont need power to it when the trucks off. I've got full time power in my bed if I need a charger when my trucks off.

 

I've got one you could pick up to borrow or I could bring by for you to use if its on a day I have off. You will also need a 35mm? socket for the axle nut that I also have.

 

Yeah. I don't have a 35mm socket either. I'm pretty sure that is the size. It's still going to be a couple of weeks before I can do the install.

 

@Beef Nachos

 

I don’t even have a roof rack

 

Do you have Ram mounts? EE says the pre drilled holes fit 10-32 screws and the Ram mounts are 8-32

 

10/32x1/2" is what EE recommends for the threaded holes on the EE mount. I'm not sure about the ram mounts, I used what came with the mounts and never looked into the threading.

 

I used 10-32 on mine with no problems.

 

I have one if needed

 

Got tired of jacking with the short wires for the cigarette lighter. Ended up extending them

 

Happy Birthday @Beef Nachos!

 

Thanks homie. I should never have started this tradition

 

I got a new position where I finally have weekends off. I just have to work one weekend a month. Maybe now I can finally make some meets.

 

From everything I’m seeing, I need a topper or rack to make this work properly, correct?

 

I'm going to mount mine between the top of the tonneau cover and below my bed bars....

 

what meets

 

I will hook it up to the wheels. They have more pictures on the web site. I don't think you need a topper or a rack.