DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

nope

 

So Padre was pretty fun this weekend and a bit more difficult then I was expecting. Luckily I only got stuck once the sand was like sugar and the 60 mile stretch took like 3.5 hours to do. Not to mention the new bumper is on, but has to be taken back off to add the stuff that didnt get added because it was 3 days late coming from powder coating. Here it is though and rear to match not quite as dramatic pic though.

 

No, don't know why the option to be able to mass upload went ahead, but now you have to upload each one, one by one...

 

If anyone says cutting off and doing aftermarket shackle hangers is not hard... is a damn liar.

That project was worse that swapping the front diff...


It was at this moment, where I was mentally checked out and done with the entire project and I just wanted to be done, and I still had the driver side hanger to remove...



But the project is done with major help and major thanks to @Zac of all trades and his stepdad who I am pretty sure had ZERO idea what he was getting himself into on a Sunday... so did I... but it is done.

 

Did you have to drill new holes after removing the stock hardware?

 

i like that rear bumper, how much was it

 

Yes and no, all the holes in the frame have to be drilled to fit the new bolts, so they have to be 1/2" holes. They are close, but not big enough, so just have to drill them out a little bit. A good step bit would have worked a lot better now that I think about...

I did not have to drill out the holes in the bushings for those bolts like you sometimes do with some leaf packs.

 

Dibs on the Pelfrey!

 

Ummm technically all I did was pay shipping for it, I got it of @haboob_tacoma on IG he was I just happen to catch him at the right time. His truck is sick you should check it out.

 

RTT Guys.....

Roam Vagabond V2 + Annex

Or...

ARB Simpson III

 

Price and Spec differences?

 

Roam


Capacity 2+ (650lbs)
Ladder 7.5' telescopic aluminum (no additional extension required for aftermarket lifts)
Frame 1" aluminum frame, all aluminum joints
Mattress 3" high density foam, anti-condensation mat
Fabric 280g ripstop poly/cotton, UV, water, and mold resistant
Rainfly Lightweight PU-coated oxford polyester, vinyl sunroof window
Cover Black, heavy-duty, laminated, 600 GSM PVC cover
Weight 120lbs
Size (closed) 56” x 48” x 10”
Size (sleeping) 56” x 96” x 52”
Install Attached via aluminum extrusions on base with universal sliding brackets and bolts
Warranty 1 year

ARB


FEATURES:

Series III tent incorporates an updated design and new materials for better strength, improved weight limits, UV rigidity and complete water proofing while adhering to CPAI-84 fire specifications, a requirement for the United States and Canada.

• Manufactured from high quality, waterproof, poly/cotton rip stop canvas - 300GSM PU impregnated canvas
• Incorprates oxford polyester flysheet with excellent water shedding ability - 1000mm/3ft water head
• Taped sealed seams for double protection & all weather vents for reduced condensation
• 1" diameter anodized aluminum retractable ladder support up to 265lbs
• 2.5" high density bonded chip foam mattress with removable cover for increased comfort and durability. Bonded chip foam evenly spreads weight from the body better across the mattress
• Incorporates unique twist lock pull out all weather awning and true optional zip-on annex
• Fine insect screened windows and door protecting from the smallest insects for better night sleep
• UV stabilized laminated welded PVC cover with high quality vision zippers. Triple strap design.
• Quick pack bungee cord system to assist when packing down tent, speeding up pack up time.
• Easily mounted to ARB's purpose designed roof racks or most rated cross bar systems.
• Unique configuration to unfold off either the side or off the rear of the vehicle.
• All weather entry door with grab straps to help assist getting into the tent.
• Fully backed by a 2-year warranty

Size:

• 55" (1400mm) wide x 94.50" (2400mm) long x 51" (1300mm) high
• All Aluminum Components Feature an Anodized Finish for Improved Corrosion Resistance and Appearance
• Total weight 154lbs/70kg
• Comes Complete with Mounting Hardware, Wrenches, Ladder, Travel Cover and Comprehensive Instructions
• ARB Awnings can Also be Paired with the Rooftop Tent.
  
  
  Price is within ~$100 of each other.

 

I would say ARB, just because I have not heard of the Roam brand much.

 

Been around about a year, Texas company.

 

Had no idea it was a Texas company

 

Same here.

Looks like a good tent, so I don't see why it would not be bad purchase to be honest.

 

I haven't looked into the roams but a few things I think since having an rtt. You will get condensation in your tent, an anti condensation mat is not something I would go without. Arbs quick close bungee system seems really helpful though I've never used it, @Zac of all trades can probably give first and experience since he has one. The handles to assist existing the tent sound nice but it shouldn't be hard to fab up your own, I may do it with mine but don't really have any issues getting out.

 

There seems to be plenty of love for Roam in Texas Overland facebook group

 

The owner is in there, I'm sure there's a bit of shilling going on.

 

We have only used a really nice Tepui but im not dropping $3000+ on a tent.