dirty deeds' deeds, done dirt CHEAP! and dirty vibes

Understandable​

Should have thought about that 6 months ago!!!

Just giving you a hard time buddy

 

I finally saved enough to buy one.

 

Atta boy!!! Thats half the battle!

 

Squeaking noise, not loud and very faint, when I turn the wheel at a stop or sub-5mph. Ball joints, tie rods, steering rack, wheel bearings?

I know I need uppers because with a tiny motor too.

 

Didn't think there was a difference between v6 and 4 cyl, regardless of trans, except the access doors.

 

IFS should fit, I believe they are the same up there. something with the cross member being off on a 4 cyl / or manual. that would impact the mid and Tcase skids fitment

 

Well poo. I would want those to fit in the future when I buy them. Comparing apples to apples, I've not seen a choice between engines or trans on competitor's sites (could be mistaken). Mostly just see folks asking about exhaust reroutes on the skids

 

I know @Casper66 had to modify either the mid / or tcase skid to fit his 4 cyl, different by about 2" or so

 

I'ma creep and see what he did. Thanks!

So, you do have a skid that's on hand?

 

OP should have bought a 1GR

 

doubt it, checking......

 

Nothing was under $30k with low miles, like mine was, at the time. Only other taco then was a v6 auto dcsb, dark blue. Had over 80k miles, older year model, and wasn't in great shape. Cost more than $27k

 

Okay man.

 

Get the SOS IFS if available. We can make the rest fit later.

 

Bro.... chill. I feel ya

 

You don't have to creep what would you like to know?

 

Hey Everett, I had a 2.7 automatic when I got them from Eddy. He was on e of the only ones who'd even talk to me. The IfS and T-case skid bolt rt up. I had to cut the Trans skid and add 2" of length to it to make it fit. I ordered the IFS skid oil drain delete and cut the hole myself to make sure it was correct but found when I tried it on the V6 it was still correct. So, the only change I found that really needs to be made is to lengthen the trans skid 2"

 

I quoted Everett and let him know since it appeared he'd be doing the mods

 

Nice pics??