1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Do I need the wiring Harness

Discussion in 'Lighting' started by cgmfl, Aug 13, 2012.

  1. Aug 13, 2012 at 8:11 PM
    #1
    cgmfl

    cgmfl [OP] New Member

    Joined:
    Aug 13, 2012
    Member:
    #84697
    Messages:
    3
    Gender:
    Male
    Orlando, FL
    Vehicle:
    '10 Prerunner TRD Sport
    Just bought a 2010 yota tonight and wondering if I need the wiring harness for DDM 55watt 10000k low beams. How about error eliminator? I had ddm in my 08 f250 and only had a few problems with lights not coming on immediately. Should I get 55 or 35?

    Thanks
     
  2. Aug 13, 2012 at 8:24 PM
    #2
    Davidd

    Davidd Well-Known Member

    Joined:
    Jul 31, 2012
    Member:
    #83836
    Messages:
    191
    Gender:
    Male
    First Name:
    David
    San Jose, CA
    Vehicle:
    02 PreRunner
    Truck Built by DMZ
    As long as you purchase the kit with the mounting harness you are good.
    Just know what your need. I have an 02 Tacoma but I know I needed an H4. Not sure what is needed in the newer Tacomas

    55 vs 35? It depends on what you are going to do with your rig. I have 35w on my headlights and they are plenty. I also have the hi low combo and when I go offroading, I have 3 35w converted into my hella 4000. I purchased 5000k in color.
     
  3. Aug 13, 2012 at 8:24 PM
    #3
    NelsonTacoma

    NelsonTacoma This is my derpawayinator!!!!!

    Joined:
    Mar 25, 2010
    Member:
    #33969
    Messages:
    2,093
    Gender:
    Male
    Tucson, AZ
    Vehicle:
    06 PreRunner TRD Sport 03 4Runner Limited 4wd
    Bilstein 5100's , 6000k HID Hi/Low Kit, Magnaflow Muffler, 1.5 inch AP Wheel Spacers, Mudflap Delete
    I would just go with the 35 watt. 55 is way to bright, and if you're not doing a retrofit you will just be scattering light even more so. You don't need the error eliminator, that is for cars with a "burnt out bulb" detection system.

    I highly recommend spending a few more dollars and get the hi/low kit, it comes with the relay/wiring harness and everything you need to make it the HID's work without any modifications. I also recommend getting the analog ballasts, I have the digital ballasts in my fogs and they don't always light up when I turn on my lights, I have to flip the switch a second time to get them to work. I have the Hi/Low 6000k kit installed and it was super simple. There's a write up on here that covers everything you need to know to do the install.
     
  4. Aug 13, 2012 at 8:26 PM
    #4
    NelsonTacoma

    NelsonTacoma This is my derpawayinator!!!!!

    Joined:
    Mar 25, 2010
    Member:
    #33969
    Messages:
    2,093
    Gender:
    Male
    Tucson, AZ
    Vehicle:
    06 PreRunner TRD Sport 03 4Runner Limited 4wd
    Bilstein 5100's , 6000k HID Hi/Low Kit, Magnaflow Muffler, 1.5 inch AP Wheel Spacers, Mudflap Delete
  5. Aug 14, 2012 at 10:16 AM
    #5
    09DBLCAB09

    09DBLCAB09 Well-Known Member

    Joined:
    Aug 11, 2012
    Member:
    #84571
    Messages:
    149
    Gender:
    Male
To Top