Dobinson coils on 5100's

Hi Everyone
I'm looking for any experiences or suggestions with Dobinson c59-352 coils. I would like to use 5100s with my center bumper and 12k winch about 150-180lbs. Has anyone used this set up?
hoping for 2" lift as I have a 1.5" aal for the rear. This is my daily and use it to go camping with my lifted cargo trailer camper on forest access roads. Any input is welcome!

 

Sub - Also really curious to hear peoples review/thoughts on putting Dobinsons coils on 5100s. Is anyone doing that? I was looking into getting the C59-314s for a 2" lift with a stock front end. Seems comparable to the OME 888's that people put on tacos all the time. Those 888s are 405mm/590# and people say they sag after about a year. The Dobinsons 314's are very close @ 405mm and 586# so I'm assuming they will sag as well after a bit.

fwiw OP, those C59-352s have a spring rate of 720# and are 385mm long.