Does Anybody Have These on a White 3rd gen?

http://iconvehicledynamics.com/shop/iconalloys-wheels/1354-compression-17-bronze-finish.html

I am seriously thinking about changing my T4R Pro 17" wheels for these...

 

nobody? anybody have Icon Alloys at all?

 

I have the Alpha in black. It was a debate between those and the compression.

 

I really wish they had 16" wheels

 

If you do, i would like to buy your PRO wheels.

 

those look nice! size? what size tires are you running? I assume you have a lift? their wheels are hub centric, correct? no vibration running down the road?

while I like the black wheels, everybody and their Mom in my area has black wheels. that is the reason I want to change, to be a lil different. there is not one Super White Taco with bronze wheels in my area that I have seen. that, and I have always been a fan of bronze wheels...

 

if I swap them I plan to post mine up for sale.

 

Running 265/70/17. Yes I have a ToyTec BOSS lift. Got right at 2” in the front. I think they are hub centric but not sure. I have zero vibration at any speed.

If I had to do it again, I’d still get the same wheel but go with Nitto Ridge Grapplers instead. Put a set of those on my ‘15 4Runner a couple weeks ago and like them a little better than the Duratracs.

 

nice! I am running 265/70/17 Terra Graps on stock Sport suspension. your tires look huge in the pic. I like it a lot!

 

so I emailed Icon to make sure their wheels were hub centric and they replied telling me that they are lug centric. on their site they show the hub bore at 106.1. I am pretty sure that would make them hub centric to the 3rd Gens? or am I missing something? I do not want ANY lug centric wheels. I have had bad experiences with those in the past, I won't even consider them now.

 

Buy SCS.

 

haha, not really a fan of their (SCS) wheels...they are ok but looking for something different.

 

https://www.***********************...a/products/rr5-v-17x8-5-6x139-7-toyota-trucks

 

were they hub centric? any vibration issues? I love the Compression wheel, just don't want any issues.

 

those actually are pretty nice.

 

I may be slight confused what you are asking?? There is no vibration whatsoever. Ive ran it up to about 90 mph. Only complaint is they hold water at the bottom lip. Not a big deal just frustrating after you wash it.

 

sometimes with aftermarket wheels they are not hub centric and you have to use hub rings to make the wheels fit the hub bore correctly. if you don't have the wheels fit exactly over the hub bore (like the hub bore in the wheel is bigger than the actual hub on truck), this can cause a vibration as you drive down the road.

 

@wilddawg95 is sportin' some Icon Rebounds (similar design). Some pics in this thread-
https://www.tacomaworld.com/threads/285-75-17-perfect-size-on-3rd-gen.588590/

 

Icon compression on white sport.