Dog Crates

No. Crate took up all seats, leaving only about a foot of room around it.

 

Owens Products dog box. Fits well, plastic lined for insulation, vents on doors and sides, top compartment for storage, bolted to stock bed/frame bolts and front bed rail. Very happy so far...

 

Anyone have pictures of a gunner kennels G1 intermediate in the cab of a 3rd gen?

 

Should fit. Here’s a lower cost crate I got petsmart but as you can see, the key measure is the exterior width.

https://www.tacomaworld.com/threads/dog-crates.503970/page-2#post-19037067

 

Nice. I pulled the trigger on the G1 intermediate. Bringing our little golden retriever puppy home next week

I’ll post a picture here of the crate if I can remember!

 

Gunner Kennels Intermediate technically fits, but it takes up 75% of the back of the cab and you have to pull one of the front seats up quite a ways to do so. Being 6’4”, it simply takes up too much space in the cab for me.

I’ll probably still keep it as it’s an awesome kennel, but will end up buying the tie down kit and putting it in the bed.

I’ll post pics soon.

 

It fits just fine. The long section of the back seat needs to be folded down. I would recommend you also strap it down to the baby seat anchors in the back wall of the cab. Try to also strap it sideways so that the kennel doesn't rub against your door. my gunner scratched my door on an offroad trip because I didn't strap it sideways essentially pulling the kennel into the cab.

 

"Trust Ray Allen Manufacturing with your professional K9 gear and equipment needs." - https://bit.ly/2TJVMOA

Ed

 

What kennel is this?

 

Gunner Kennel size Intermediate

 

We bought a Gunner Kennel for our Dutch Shepherd after a friend got T boned in his Ford Transit and lost his dog. The gunner is great but it’s heavy and expensive.

I’d do it again.

 

I have a Wiremesh Kennel (off Amazon) thats in the bed of my truck. I have the OEM bed mat so the kennel itself won't slide. I've then strapped the kennel down so it absolutely won't move.

From there i also run a Soft Topper so dependent on how hot it is i'll usually open up the sides /rear window to allow good air flow

 

We use a Variocage for our malinois'., divided in the center and fits both dogs on their own side of the crate. Also, the only crate crash tested!!

 

Is the front passenger seat usable?

 

Would it be possible to put the kennel on the other side, leaving the rear single passenger seat as an actual seat?

 

How can your dog drive the truck if it's in a crate??

 

The single seat in the rear is on the driver side and the double seat in the rear is in the middle and passenger side. In the picture the kennel is on top of the folded down double seat section behind the passenger.

The single seat in the rear behind the driver can still be used as a seat, but it can be tight for a bigger person as the back of the kennel is butted against the right side of the single seat.

 

Awesome. Any shots of the interior how this is setup?

 

WTH, is that for roasting dogs? Even with those little vents, looks like it would get really hot.