Driver side lean

Hello,
I am a new 2wd TRD sport tacoma owner and new to the forum. I had a chevy colorado previously that had the "chevy lean". Now I noticed that my brand new tacoma is already leaning to the passenger side. I think it is a common problem with trucks in general but it drives me nuts and I hate how it looks! On my Chevy, I compensated for the lean by cutting a coil on the passenger side spring and adding spacers to the driver side. I have been doing some reading and searching on the forum and found that Toytec makes a spacer for the driver side of our trucks. It seems to be used with aftermarket suspension components though and I am not clear about whether this spacer will work with a stock strut assembly. I have no plans for any kind of lift or anything like that. All I want to do is get rid of the lean as easily as possible. I know that some of the information that I am looking for may have already been covered somewhere on the forum but I had a hard time finding answers to a few questions that I had.

1.) Will the toytec spacer work directly with a stock TRD sport strut assembly?
2.) Is there some sort of guide for the installation of the spacer?
3.) Will I need to get the front end aligned after the spacer is installed?

Any help would be greatly appreciated!
Thank you