Driver side "leveling spacer"

For what its worth, I have the Eibach coils and the Bilstein 5100's set @ zero. Also added the 1/4" spacer for the Taco lean. I don't have the Taco lean and the truck drives as straight as can be, no issues.

This mod was done when the truck had less than 2000 miles on it.

No vibs, no issues at all. Hope you get it figured out. Toyota of Concord, NC did all my suspension work. The tech was excellent. Best of luck.

Taco4x4nc

 

I just had this same set up installed yesterday. 5100's at 0, 1/4" spacer on drivers side and Eibach coils. No issues whatsoever. When I had the rear suspension TSB done about a year ago, I got a very slight vibration between about 3 mph and 10 mph. Lifting the front 1.6" actually eliminated the vibration. Here's a few pics.

Stock from factory:


Rear TSB only:


TSB, 5100's at 0 and Eibach coils:


I'm real happy with this set up, only thing I have to do is replace the stock Dunlops with some 265/75/16's.

 

what are all of you specs CASTER,CAMBER,TOE