Dwaltdtx's Discount Tire sponsored build

Indeed! ​

 

Nothing like a good ole flop to get the juices going. Expensive habit though

 

I knew Jambo would be my last trip for a bit as our second son was due. He ended up coming a month early, but is perfectly healthy after a couple weeks in nicu.

 

It was surprisingly easy on my pocketbook, I wouldn't recommend it without good insurance coverage though

 

Congrats!

 

Congratulations!

 

Thanks fellas. He's 4 months now so I'm a little behind on my timeline.

 

I'm sure I will miss it down the road, but I sold my four wheeler as I felt it wasn't needed if making my truck more capable.

I used some of the funds from the sale to regear, add lockers and go up to 315s. Here are some pics at the shop when we were checking clearance and bfhammering as needed. I also got a set of toytec 2.5s coilovers that Tandem had for a deal and removed my sway bar. I really like how it rides now.

 

Shakedown run at BMRA at the end of September to try out the new setup. I had to cut a little more off the cab mount chop while there and I rubbed on the inner fenders so I will dial up the coilovers before I head out next time.

 

You removed the rear fender flairs didnt you?

I think I need to do the same as well... did you keep the fender liner on the rear once the fender flair was removed or is that gone as well?

 

Ya I actually took them off due to my previous rear bumper not allowing room for them. I left them off assuming I would end up cutting to make room for the tires. Haven't had to do that yet though

 

Ah I see, this weekend caused me to break two of the plastic clips on both sides... so I need to I guess remove them and see how they look removed and either go ahead and cut the fenders or what.

I assume that the fender liner won't stay in with them removed will they?

 

Liners are still there, but did trim them since I have the high clearance. I think some people just fold them back to avoid having to cut

 

I'm pretty much caught up on build progress and trips to this point. I will try to go back and add install info and pics over time. Complete suspension overhaul, vinyl wrap and trailer build will come early next year. I am finally getting my rear bumper powder coated after a hunting trip this weekend so I may knock out some other small stuff when I remove the bumper.

 

Congrats bud.

 

Impromptu Barnwell trip and got to watch a pit crew throw a full suspension overhaul on @TRD493 truck at camp.

 

Came out nice, headed to Tandem Monday for the alignment and to turn that damn collar.

 

Get it knocked out?

 

Yep! Little bit of a dif howl so maybe put my dif drop on or might have to put some shims under the leaf pack. After it all settles I may take out the third leaf since the rear is about 2" higher than the front. Rides awesome tho!

 

Awesome. I may have to check out the clickers with you next time around. I am trying to pin down what I end up with next