stock steel wheels, stock coil-overs

I'm selling my East Coast Gear Supply needle bearing puller and bearing/race driver tools. They worked perfectly for me, and installation of the new bushing was easier and smoother than I anticipated. They go for $105 + $17 shipping, and I'm asking for $SOLD shipped to the lower 48. There is some wear on the smallest race driver from the previous owner, visible in the picture. I don't know why he even used this one though, as I used the next larger one per ecgs's instruction, which allows you to set the bushing perfectly flush with the carrier without worrying about driving it in too far. SOLD


Four stock steel wheels from my 2009 in decent shape with some minor surface rust. They come with center caps in great shape, tpms sensors that were fully functional as of a week ago, and lug nuts. Will not ship- located near Morgantown WV- may be willing to meet within a reasonable distance. Asking $100


Stock coil-over assemblies from my 2009 with 85,000 miles. They were still riding fine- I just upgraded. Make an offer.

 

Bump

 

Bump

 

Bump. $75 shipped

 

To the top. I know somebody needs these.

 

How's the truck ride after switching out the bearing? Pretty easy to get it in and out? Looking At replacing the bearing on mine so am interested in getting this

 

Truck rides better than new! I did not have vibes yet but there was a lot of play in the cv if you grabbed it and shook it. I did the bushing as preventative maintenance at the same time that I installed a minor lift and replaced my lower control arms and cam bolts. It just seemed like it was the time to do it since I had everything taken apart anyway and I didn't want to have to go back in later and deal with it. I was a little nervous about it but it all went very smoothly. I called ecgs to clarify a couple things and they (Chase I think?) were very cool and helpful. Let me know if you have any other questions.

 

Added new items.

 

Bump

 

ECGS tools are sold

 

Bump