1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Electrical help, motorcycle

Discussion in 'General Automotive' started by MxRacer190, May 15, 2013.

  1. MxRacer190

    MxRacer190 [OP] Well-Known Member

    Joined:
    Apr 15, 2010
    Member:
    #35345
    Messages:
    2,471
    Gender:
    Male
    Georgia
    Vehicle:
    06 SR5 4x4 Indigo
    Bike:
    2009 Buell XB12SCG

    So, I was messing around with my headlight and signal wires the other day, and I guess my signal wires touched and blew a fuse, specifically the "ACC" 10 amp fuse. I had no running light or turn signals. So, I tape the wires back up and replace the fuse. The signals worked, but my running lights still do not work. . .

    THEN, on my ride back home from the auto parts store, the fuse blew AGAIN. And now I don't have turn signals again. Anyone know what could be the problem? Maybe it could be some wires touching, but I only fiddled with two of the signal wires. I've been riding this bike for a little over 4000 miles, and this is the first time it has happened.
     
To Top