Electronic Cigs

Yes and no. Once you get the hang of building coils, you can bang an atty out in 5 minutes. And I can assure you, the flavor is well worth the extra time.

 

Wash your windows now. Vape builds up a nasty film on everything over time.

 

Should sell me that Praxis

 

I picked up an Atlantis with the Aspire sub ohm battery just before the weekend and very impressed with it. Regret getting the mini Nautilus now because there's just no comparison

 

I remember when I vaped a protank and going to 4 volts was hot enough. I wouldn't even wanna try to hit it that hot

Ya I noticed the film in the taco when it froze recently. Gave me a reason to do a deep clean in and out

Took a friend of mine vape shopping this weekend and he got a ipv3 and the Atlantis. I will say that Atlantis can chuck some vapor

 

The high formaldehyde the cause of a machine they used to simulate someone vaping. They set the machine to do 4 second draws 5 times back to back at 5 volts. Burning the atty, cotton, and probably toasting the battery as well.

So the study is correct, the percentage of formaldehyde is higher than cigarette. But only when y I u are a retard and like dry hits at 5 volts

 

This,

the atlantis is good for blowing some clouds. But dripping is was better for that. Plus the flavor the you get from dripping is 10 folds better.

 

So someone educate me here. I ordered an IVP mini 2 to try out for shits and giggle since they are so cheap (still waiting on it). Also ordered the new Goblin RTA. Should be here Saturday.

Today I used a friends IPV mini which goes up to 30w. I had my Kayfun with me which is at 1.2 ohm. 13.5W is where I liked it the most. On my Provari its good at 3.6V. Anything higher sucks. The new IPV mini 2 that I just ordered goes up to 70W...when would using that high of wattage even apply? Let alone even the 30w that the original IPV mini produces? Seems like you'd be burning anything you put on it at that amount of power. I've seen where people are vaping 30w, 50w, 70w, etc. on sub ohm builds. What am I missing?

 

My roommate is one of those people lol he likes to vape around 75 watts. When ever I do a build for him it's a 6-8 wrap coil around a small screw screwdriver. I believe the last ohm reading was a .25 or .3. He likes a warm vape to mimic cigarettes and also likes to vape a decent amount of time per hit.
I have dual nano coils on my mod and it's not hot enough to him even though they light up quickly

 

it's all about air flow. more air equals a cooler vape so you can push it to higher wattages. the nic level of the juice matters too. more nic equals stronger throat hit. no way i could hit 70 watts with a 24mg juice, it would choke me down. but i can with a 0 nic juice easy

 

Interesting. I'll have to experiment just to see what it's all about. My current setup with 12mg juice above 15W just taste aweful. Might have to pick up some 6mg and see how my Magma and the new Goblin like higher wattage since they have better air flow than my Kayfun.

Is it really all the novelty of blowing big clouds or do you actually get a better flavor and vape from it?

 

It is not recommend you go past 12 nic on a vw box or mech mod. The nicotine level "triples" due to the high heat and amount of vapor. Nicotine past 50 is lethal.
I don't vape higher than 6 because the buzz I get can knock me on my ass sometimes

 

It's really about what you prefer. usually the wide open air flow rba's like the mutation x are for cloud chasing. and the rba's with normal air flow and reduced chamber are for flavor chasing like the stillare or tugboat

 

Think i need a box mod with dual 26650.....

 

Just get another sigelei or a ipv3

 

Lol I'm still waiting for my cousin to buy me the one he broke!.

But i would still have to carry more 18650 with me

 

I might be selling my black ipv3. Just got a IPV mini 2 and the fucker chucks.
I also will be letting the praxis go.

 

I may be in the market for an ipv3

 

Gimme! Praxxis I mean. Even though I have more than enough mods x.x

Just got a SMPL, the M1 from AV, Orchid from Aethertech, and a bellcap for the kayfun.