1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Engine knock code

Discussion in '1st Gen. Tacomas (1995-2004)' started by Hp4Play, Nov 3, 2015.

  1. Nov 3, 2015 at 1:42 PM
    #1
    Hp4Play

    Hp4Play [OP] Well-Known Member

    Joined:
    Mar 3, 2013
    Member:
    #98886
    Messages:
    181
    Gender:
    Male
    First Name:
    Andy
    Tempe
    Vehicle:
    double stuffed taco
    alright so I'm battling this damn knock code. Truck has 275k miles on it. Before I tear apart the intake I want to cover my bases. Checked continuity threw wires and no continuity. Hooked meter to wire and grind taped on the engine and showed voltage. All was running fine until I went off road the other day. On my way back it threw the code. Along wif maf sensor. I changed the maf ran good for a little bit and then tree it again. I just compression checked all cylinders and are between 200 and 210 so I don't think its internal. Must be some type of fuel delivery issue. I have the 320 lph fuel pump. Bigger injectors. And I'm supercharged. Could it be the fuel pressure regulator? I checked the iac check valve and in working order. Spark plugs look fine. I'm at a loss here. It's running 14.5 in non boost and when it goes into boost it was running 12.3. I can't really tell now as it keeps retarding. I don't want to bypass as I don't want to kill the motor. I can't find any vaccum leaks.

    Any help would be appreciated.
     
  2. Nov 9, 2015 at 12:15 AM
    #2
    Hp4Play

    Hp4Play [OP] Well-Known Member

    Joined:
    Mar 3, 2013
    Member:
    #98886
    Messages:
    181
    Gender:
    Male
    First Name:
    Andy
    Tempe
    Vehicle:
    double stuffed taco
    Found the issue just externally mounted the knock sensors and running like a champ again.
     

Products Discussed in

To Top