Fabtech, ProComp 6" lift or more. Pictures

And the winner is ^^^^^^°^

 

I suppose I will have to get new UCAs Light Racing are great had them on my 4rnr.
I was thinking Billy 6112s first of second settings not sure about the diff from stock TRD shocks.
And leaf pack in the back without the block. Want to keep the ride I have, it is nice.

So what say thee?

 

If you plan on going up higher I would get heimed uppers just in case you cant align it.

To get more height in the rear without the block an aal wont cut it. Youre going to have to do a custom pack. You can also gain significant height by doing a shackle flip and extended shackle.

 

Hey guys, I have a procomp with just the strut spacer on mine now and the ride quality is awful, what front shocks/ struts are you guys running? Looking to upgrade

 

Fox and Icon are the only ones that offer COs off the shelf.

Look at the BDS kits to see the Fox's and Icon has them under larger lifted trucks on their site.

 

You can also buy the bilstein f4-be5-e122-to which is a full length shock used on the rcd kit. Just use your factory coils or aftermarket ones. The shock with the stock coil will yield you 5" so you can either add a 1/2 top plate spacer or add ome 883 coils.

 

Forgot about Billies... mah bad

 

There was a group buy on these 6inch coilovers, can't remember the name of them for the life of me though I wish I could

 

This^
I added 112-620 Eibach coils to my billes and mine still rides great.

 

Fox, Kings, Icons, Bilsteins, Toytec, EMU, FabTech and ProComp all make replacement coilovers.

Not all of them make a set for 6in's of lift but I have seen some guys get a good deal on a 3in set and add a spacer to the top hat on them. It would be ridiculed by most but it will still ride better than the spacer lift with factory coilovers. I am still running my stock coilovers with the spacer on my top hat from my FabTech kit. I did opt for the Dirt Logic shocks in the rear with the intentions of purchasing the front coilovers later down the road but I found the ride to be "acceptable" for what I needed at the time. I now have some additional weight on my front end with and aftermarket bumper and winch and am looking at replacing mine now with something that will gain me my clearance back.

It all really boils down to what you need your truck to do on the budget that you have to work with. We would all love to have unlimited funds to go buck wild and get the best of the best but that is just not reality.

Let the begin...

 

Well said.

 

Ordered the icon 6 inch lift compatible coilovers

 

Those have went up in price quite a bit since I had them..


Congratulations though, make sure to get the spanner

 

I have these but with the CDC resi. They work great. Good choice...

 

Man I need some ucas bad! Don't want to shell out the funds but looks like I have no choice

 

What are the options when it comes to 6" I'm only finding the icons 6-7 that are meant to go with a pro comp lift, don't know why, or if it would be a problem for me when I'm basically re building the whole system. Pretty much the only thing left rough country would be the spindles.

 

I would suggest the Fox CO's that are made for the BDS kit, they have a couple of advantages over the Icons. Just scroll through the " products discussed in this thread " banner at the bottom of the page.

 

Yeup, this was stated earlier.


http://m.ebay.com/itm/121020867538?...vr_id=1055470257114&_mwBanner=1&ul_noapp=true

 

Or you could use the rcd bilsteins shocks and eibach coils either 1.5s or 2.5-3" coils. That's what I did but it also put me at 8" of lift but the shocks and coils only costed me about $500. That's way cheaper than coilovers