1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

fine tuning lift height and options

Discussion in 'Suspension' started by wolfman00, Jul 13, 2011.

  1. Jul 13, 2011 at 3:04 PM
    #1
    wolfman00

    wolfman00 [OP] Well-Known Member

    Joined:
    Mar 7, 2011
    Member:
    #52513
    Messages:
    62
    Gender:
    Male
    First Name:
    matt
    Annapolis
    Vehicle:
    11 Reg Cab 4x4
    5100s 1.75 in front, 1" blocks out back with TJ 5100s. 265 hankooks.
    hey, so right now I have a 2.25 strut spacer that I picked up for 29 bucks. (nice deal right?) For now its fine, but i planned on it being a temporary option.

    here are my ideas, main objective is I kinda want to stay at 2.25 as it seems to be just high enough to keep the front in spec and not have to get UCAs.

    options-
    5100s at 1.75 and a 1/4" trim spacer to get 2.25 (would that work well?)

    I also picked up a set of front trd bilstein struts with 5k on them. (not being used, just got them because I could, they are nearly new, and free...so why not.
    the other idea is those with 884 coils and the 1/4" trim spacer.

    I have a reg cab 4x4, so with the ome coils, i hear so much variation in heights that I have no clue what I could get. General concensus I get is that with a reg cab 4x4 the 884s give about 2". Am I on base with that?


    I am just kicking some ideas that I have and seeing what would work well. I have scanned the shit out of this site so I know what I need, just what components work best together to get me there.

    thanks
     
To Top