1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fitment question on KMC Enduro (machined finish)

Discussion in 'Wheels & Tires' started by miagi, Nov 23, 2011.

  1. Nov 23, 2011 at 7:49 AM
    #1
    miagi

    miagi [OP] Member

    Joined:
    Feb 2, 2011
    Member:
    #50425
    Messages:
    9
    Gender:
    Male
    Wondering if someone could help me out. Since they have been discontinued, I'm looking at purchasing a set of the machined KMC Enduro XD122 before they are no longer available online. I've done some searching on the board but have only found fitment threads on the black version thus far, which have a different offset than these.

    My question is whether the following size would pose any rubbing/fitment issues on my stock 2012 TRD:


    • Size: 17" x 9"
    • Bolt Pattern US: 6X5.5
    • Offset Mm: 0
    • Back Spacing In: 5.00


    I am planning on running 265/70/17 Duratracs with them, and eventually maybe a 2" lift with 275/70/17.

    Appreciate any help!
     
  2. Nov 23, 2011 at 11:42 AM
    #2
    KPT

    KPT sees what you did there.

    Joined:
    Sep 3, 2009
    Member:
    #22227
    Messages:
    32,339
    Gender:
    Male
    Vehicle:
    09 Prerunner
    Katskin leather interior, Satoshi grille, Bilstein 5100's @ 1.75, rear leaf TSB, magnaflow exhaust, 18x9 BBS RW's, 275/65/18 Nitto TG's, black headlights, black taillights, Hella Supertones, weathertechs, EFX tri-fold tonneau, n-Fab steps
    The wheels specs look good except for the width. Duractracs are not approved for use on 9" wide rims in their 265/70/17 size as per the Goodyear website.
     
  3. Nov 23, 2011 at 7:27 PM
    #3
    Just Zach

    Just Zach Well-Known Member

    Joined:
    Oct 17, 2010
    Member:
    #44816
    Messages:
    55
    Gender:
    Male
    First Name:
    Zach
    Ogden, Utah
    Vehicle:
    14 TRD DCSB MGM
    I have those wheels. With 265/70 Michelins I had some light rubbing even after some significant plastic trimming and a 1.5" lift. Now I have 285/70 Duratracs with a 3" lift and I had to do a cab mount chop to get it it to not rub. I like the wheels but it's so wide and offset that it was quite a bit to make them work.
     
  4. Nov 26, 2011 at 7:28 AM
    #4
    miagi

    miagi [OP] Member

    Joined:
    Feb 2, 2011
    Member:
    #50425
    Messages:
    9
    Gender:
    Male
    Thanks for the info guys. Right now it's Looking like this might turn into a real labor of love though. Across the country I can only seem to locate 3 of these wheels. :mad:
     
  5. Nov 26, 2011 at 7:47 AM
    #5
    Argenis83

    Argenis83 Well-Known Member

    Joined:
    Oct 17, 2011
    Member:
    #65383
    Messages:
    99
    Gender:
    Male
    First Name:
    Enrique
    San Diego
    Vehicle:
    06 tacoma double cab TRD offroad
    Engage Long Travel, 50t pack with 16" king triple bypass on rear, 4 Soltek lights, race walker evans wheels, 35" bfgoodrich KM2
    Not mine but I found this on other forum,

    new KMC real bead lock race wheels. 17x8.5 for 6 ON 5.5 lug pattern, back spacing is 4.5. Fits silverado, toyota, Nissan, etc
    brand new never mounted still in boxes. $1400 obo buy them now and dont wait for 3 weeks from anywhere else. call text or email 619 520 5273 pmercado3@hotmail.com
     
  6. Nov 26, 2011 at 7:52 AM
    #6
    KPT

    KPT sees what you did there.

    Joined:
    Sep 3, 2009
    Member:
    #22227
    Messages:
    32,339
    Gender:
    Male
    Vehicle:
    09 Prerunner
    Katskin leather interior, Satoshi grille, Bilstein 5100's @ 1.75, rear leaf TSB, magnaflow exhaust, 18x9 BBS RW's, 275/65/18 Nitto TG's, black headlights, black taillights, Hella Supertones, weathertechs, EFX tri-fold tonneau, n-Fab steps
    Yes I believe they are discontinued.
     
  7. Nov 26, 2011 at 8:20 AM
    #7
    miagi

    miagi [OP] Member

    Joined:
    Feb 2, 2011
    Member:
    #50425
    Messages:
    9
    Gender:
    Male
    Thanks for the tip, but can't use the beadlocks. Don't think they are DOT approved...
     
To Top