Fitting OEM Pro skid plate on your sport?

Hey guys looking for some pics and or advice if they have installed the pro skid plate on there sport, was thinking about ordering one for mine.

Thanks

 

The TRD skid plate will fit on the sport and I believe all other trim.

 

All you will have to do is remove the "air dam" thing along with the tin can skid plates that came on your truck and everything will bolt right up.

 

Yes, it is very easy. Here is the video I briefly looked at before I did mine, in the pouring rain.... https://www.youtube.com/watch?v=8hUlfO-unfE

 

Thanks. When I went to my dealer and ask to order it they said no cause it’s not for the sport. I knew they where bull shitting

 

Dealer is full of shit as ussual. Easy, takeoff the front air damn, ~10 screws, very easy. Remove old skid plate, few screws/bolts very easy. Use new screws that come with the skid plate and install. It would be a lot easier with two folks, but I did it by myself and was kind of a pain holding it up etc... I laid on my back and had the skid plate my chest. Also used my Dewalt impact driver. Again, a bit of pain by yourself, but easily doable. Good luck

 

You can probably get it online for cheaper.

 

Thanks i will look into it. Being in Canada there is not a lot of after market support gotta order most things from the states so shipping really bumps up the price

 

It does interfere with the airdam. You might lose 0.2 mpg without the airdam.

Check prices with Cochrane Toyota (TacomaTownOnline) in Alberta and ask your local dealers if they can match it.

Just put it on a hydraulic jack and roll it under the truck.