Florida B.S. Thread

why do you have to get rid of him? :/

 

correct

i don't see an issue with a small lift AAL, but if you want a full 3 inches, an AAL is not the way to go. iven a 3 leaf AAL isn't going to be too great at that point.

 

I was thinking a 2" aal with a 1" block to keep it cheap or if he has the $ he could buy bornwildguy's 3" leaf packs. I would if I had the money.

 

i was thinkin 2'' leaf and 2'' block, cuse i'm gonna try to keep my leveling kit up front too, but bornwildguy's leafs are

 

Get the 1.5 block if getting one since it is tapered and the 1" blocks are just flat. Will help with the driveline angle a lil.

 

How much is your leveling kit?

 

when installed, i'm gonna try to go with my 1'' that I already have first, to see if the back is lower at all, then maybe i'll go with your suggestion, bornwildguy, btw, do u have ANY vibs? I noticed u do have the carrier bearing drop as well as the driveshaft spacer, I know that a lot of people have had great success with the cb drop, but i honestly don't see it doing much

spruce, mine is the 2'' skyjacker one, but the spacer is only 1'' thick, so i'm thinking it really only gives me 1.5'' lift, i didn't take before and after measurements well i did but replaced the shocks too, and left the paper at 2010trd's house

 

I've got a 2 inch aal form skyjacker and it looks more like a 3 inch

 

YEA IT DOES!!!!

 

is this the exact one u bought?

http://www.ntwonline.com/Skyjacker-...coma-Rear-Add-A-Leaf-2-Inch.html#.UwTg2UJdUQQ

 

Housing situation, we will be movin into a small
Apartment. Also we are going to be trying to have
Another baby soon and with a 15 month old already
Its going to be hard to balance them all.

He wont get the attention he desirves from us and
We wont have the time.

 

That looks like it but I got mine from a local 4 wheel drive shop for 112

 

Sorry to hear about the pup. I wish I could take another.

 

Well these showed up way faster than expected. The shocks should be here tonight, if so, then my truck might be done tomorrow afternoon if its slow at work.

 

So your going to be 5"-6" in the front depending how much the maxtrac's actually lift it. Your gonna have to be at least 4" in the rear. My spacers measure 1.5" & they gave me 3".

 

that's the plan, i've had a 1.5'' AAL before, and it gave me about 2.25''

 

I guess you are

 

That Florida Tacomas sticker looks badass!

Where did you guys get it?

 

Mounted the spare tire and then hooked up a 28" light bar and 2 HIDs