Florida B.S. Thread

i know but you know money tree...

 

thats the better choice honestly, don't cut until everything you need is sitting right in front of you. I'll have a one ton rear and an atlas in before I even cut the front at all.

 

Really so there is an sas in your future

 

Well would anybody know if swapping in a 4wd transmission and just changing out the transfercase to a dual case would work or is there more to it

 

yea always will be, just a matter of when and stuff

 

everything you need to know is in here

https://www.tacomaworld.com/threads/vancity4x-1ton-sas.285377/#post-7127222

 

Accelerating between 2 and 3k rpm and I hear a rattling tinny sound underneath me. Loose heat shield or something with the exhaust, any similar experience?

 

There is a TSB for engine detonation on 14s,might be it? I noticed on mine recently. I guess a ecu ref lash fixes it. Or a heat sheild loose.

 

Well where do I go for a reflash or should I buy one of the ecu connecter deals you think? I'll check the shields this weekend too

 

Take it back to the dealer for the TSB.

 

They going to try and charge me for that?

 

sounds like it's totaled

 

that is at 1500 RPM but it could be, here is the TSB

https://www.tacomaworld.com/threads/t-sb-0044-14-feedback-engine-ecm-reprogram-pinging.337705/

 

no TSB is Technical Service Bulletin which is similar to a recall but not mandatory

 

Ah okay glad I asked then. It seems a little laggy at times accelerating but I never thought anything of it. Thanks for the help guys I'll take it in this weekend

 

the knock wouldn't cause it to lag, after you have the TSB done it will decrease your power a little but very small amount

 

Hm, maybe I'll check my plugs too., at 42k so probably a good time to do them anyway

 

also check the rubber flaps that clip to guard engine compartment

 

Are they around the wheel wells?

 

these get loose on me sometimes so I zip tied them, make the most annoying sound when flapping the wind lol