Fog Light Anytime- Base Model

Wired fogs up to my (pre-wired) base model but can't seem to find a fog light anytime mod that is base-model specific. Anybody know?

 

Like work truck model "base"? With literally no options and your adding fogs to factory harness?I just ask because I'm planning on this mod also. Mine is is an SR5 but on paper I think that's technically base model. Mine does have OEM fogs though.

 

Some base models were 4x4, 4 door, had limited power options (power locks, power windows, etc) ---- however they were pre wired for fog lights and some other options.

So for fogs, ya buy a set of factory fog lights, the fuse for under the hood and the switch for the dash --- and WHHAALLAA. You have fog lights!

No running wires. Wires for fogs were behind the front bumper. Fuse plugs directly into open spot. Wire attached to back of dash blank, untapped and plugged into factory switch. Everything plugs right in. Less then $75 and 30 minutes.

 

Are you saying you can "buy a set of factory fog lights, the fuse for under the hood and the switch for the dash" for less than $75?

 

It's not the "work truck" base as it is 6 lug and 4x4. Power doors/windows, V6... However it has the base trim package with the matte front end and fender flares.

@Jere I got the relay and switch for about $70 from the dealer. Fogs I found from a fellow TW member.

Anyway, does anyone have a write up on the fog light anytime for this truck?

 

https://www.tacomaworld.com/threads/cheap-free-mods.4838/#post-45430

 

Yes I did. Be patient.

 

bumping an old thread....base model here and would like to do the fog light anytime mod.

 

same